Honestly I would paint all the walls white! Sounds boring but it will look really light and airy. Think of all the wood as a bonus because it looks like built ins everywhere. One small thing you could do to the cabinets around mirror is add washi tape in a border/design(easy to remove); i would do it in white. (picture shown). They will be a lot more visually interesting. If you cant change the curtains I would consider adding extra panels in white to make the existing panels look luxurious. I have never liked behind the bed shelves... Personally I would wrap the whole thing in navy fabric like a headboard. Then carry the theme of navy white and wood with pops of another color...pink or green?

What type of capability do you have to power the lights - Will you be using a standard plug/outlet, or can the lights be hard-wired and tied into either a switch or control system? Are you tied into a single point source, or are you open to linear lighting? Do you have details of the headboard? Is the purpose of adding these lights mainly for reading? Thank you! -Lacroux Streeb

I agree I need a customer wall to wall solution and maybe a full mirror for a small bathroom would look good. The challenge coming are those electrical points. Also someone guide as to what is the right width of the mirror I should put incase I just decide to put mirror over the sink? Is there enough space for framed mirror? The width of the countertop is 26 inch and the height from countertop to sconce is 52 inch. Thanks a lot

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller