Just to clarify, you have presented 3 versions. I believe the consensus is the original version with the wood grain ( linen grain) cabinetry works the best and is most updated. The only thing that is out of place are the cabinets or "shelves" on both sides of the range hood. If this is what you need to find a solution too. I would suggest only experimenting with rendering options for these two cabinets( or shelves). This cabinet ties in all the other hard surfaces. The white is not working. It just adds another element. The black is a little dated.

A good tile installer that knows what he is doing, can easily remove that single piece of tile.... carefully replace it with another one. Do you have another extra pieces of the same tile? Do you know what brand and color the existing grout is? That will be more of the issue trying to get the grout match to match up or the finding the same tile (in the same dye lot) if you need to buy another tile. Did the heat cause the break or did a pan bang into the glass? Consider installing a heat resistant Lumicor or 3 Form panel behind the stove. Any flat material that can be sandwiched between two resin panels. 1). Crushed glass. 2). Fabric. 3). Fabric. 4). Fabric.

Well from the cover of the book you have the manufacturer's name and the name of the collection, and inside you have the name of the pattern. You need to contact someone who sells this manufacturer's products. Not every pattern is going to be viewable on Google searcj. You need to start with who is going to be supplying you with the product, i.e. the manufacturer or their representative. Here's the contact information for the company in India: http://durianlam.com/contact/ On the durian.com website you can download the Romania collection catalogue too: http://durianlam.com/romania-range-1-00-mm/ Hope this helps.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller