Think of all the appliances you use, and anything you might possibly want to plug in. Then think of where you will be when you use said items. That should give you help in your planning. Add additional receptacles for things like vacuum cleaners, etc. Your electrician should be experienced in residential wiring and will make suggestions which will also meet your local building code.

I would consider putting cabinets on the short wall where the utility wall is. Have your stove there centered on the area. Move the sink so it is centered on the long wall where the cooktop is now. Put the fridge on the end run of cabinets closest to the dining table. That will give you an L shape kitchen with a nice work triangle. If you have your heart set on an island remove all the wall cabinets and install a large island. This is not the style of your kitchen but it does show the layout I described above. L shape cabinetry with stove on short end, sink in the middle with DW to right of sink with cabinet above it for dish storage and the refridgerator on the end run so it is out of work triangle and conveniet to the dining area for serving or work triangle for prep and cooking. Island can be any style you desire. L shape with island and open across from island; you might consider this layout if you desire an island. Something like this?

There are lots of nice cordless lamps. What if you take the picture to a store that just sells lighting, and see if they have something similar in their catalogs? It would be expensive but maybe worth it if you love having them be the first thing you see when you come in the door.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller