Pankaj, I just realized that initially you told us that the bathroom area was 12'-0" x 9'-0" and later you mentioned that it was 11'-8" x 8'-0". In the last floor plan, I forgot to change the bathroom with the new dimensions. Below is the floor plan with the correct dimensions for the bathroom. The bedroom is ok, I drew it 19'-2" x 12'-6". The new layout does not change the way things are placed. Everything still fit. The only difference is that the vanity is now 4'-4" long instead of 4'-8". and the toilet is closer to the shower by 1'-0". Can you give me the lengths of the walls K and L. They are the walls between the vanity and the shower area. I will send you the new layout once you give me the length of these 2 walls.

Leather sofas can really dominate the room and can give an overall cold feeling. I would add some earthy elements, like a wood coffee table with glass or metal. Go to Restoration Hardware's website and look at their sofa room scenes. And I'm sorry I think the art is too harsh for the room. That's all your eye goes to in the room. too overpowering. I would look for something softer or maybe a cool mirror and I would add color to the room with pillows and some colorful lamps. I also think woven blinds would look great. They add warmth and give a finished look. The color of your window treatments should contrast your wall color a bit, not match it or else it starts to look generic and blah.. You have warm walls, warm floors and the woven blinds, like Hunter Douglas brand would pull it all together for you.

Sharma - for a fellow, double hanging (stacked 40 - 44" areas each) accommodates most pants, shirts and blazers. There are systems with racks that lower and raise that make triple hanging for things out of season. Let's imagine four elevations - looking at the walls with the slanted ceilings and the end walls with window / doors. You have the most height between the doors - why not put double stacked hanging there for 6'? - Or do open shelves and drawers there the depths of the door itself. 16" - 20" is deep enough to store folded clothing - 14" will do a lot. On the long sides - draw a straight line across at the bottom of the slant - put stepping open shelves above and hanging underneath on the side without the window. Use double hanging for 2/3 of the length and full height hanging for the rest. On the large window side, consider a bench under the window, as a place to sit and put on shoes and socks. Perhaps on each side of the window, a chest of drawers. Let this be the side that gives the room personality - mirrors over the bureaus. Then, on the front wall with the charming window - consider shoe shelves underneath and on each side - these don't need to be more than 12" deep and they fit fine behind the hanging on the one wall - they just need about 16" distance between to access . . Look online at easyclosets.com - you may want to fabricate locally, but the online design tool should work well for you. Good Luck! - it is a lovely space. Use the higher shelves for heirlooms, costumes, seasonal and specialty gear.

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.