Hi Cynthia, thanks for your comment. I still haven't decided about lighting. First, I'm trying to get as much natural light as possible. If there are still some dark corners left, then I'm planing to use light on those areas.

the board is installed the wrong way to start with. it should be horizontal to achieve the rustic look. why do you need a painter for such a small job? try to remove the existing finish with mineral spirits or a heat gun. apply a coat of white acrylic primer and sand with 300 grit paper once dry. clean with vacuum. apply a coat of dark grey emulsion. dry. then spray a coat of white automotive laquer very lightly. usually thus dries quick in 30 minutes. very carefully sand with 400 grit on the grains and you will now have the desired finish. cost of materials approx 1000rs.

the sink should be at 33" from the floor. your countertop height will depend on if you're using a top mounted or insert sink

Also, I would like more counter space. What size of the sinks should I get? 18 inch? Thank you.