I have a sitting area cum dining area of 300 sq ft which is adjacent to my kitchen ( 120 sq ft ). Over all colour theme is white and in STRAIGHT LINE. All cabinets in the kitchen are of white colour with grey Italian tiles and Siemens equipments. Have bought off white (leather) seven seater sofa with a coffee table with a frosted green glass top. The area left for the dining is approx 90 sq ft. My questions are : 1. Should i go in for a square dining table with six chairs or eight chairs. What should be the area of the top. 2. Should I go in for a rectangular table with six chairs or eight chairs. What should be the area and size of the table top. Have selected one with an area of 21 sq ft with a frosted green glass top. The fabric on the chair uses is black. 3.should I go in for a round table. What should be the dia or radius. Have selected one six chair Armani casa table with a radius of 2.5 sq ft. It is black in colour. The glass top is also black and the fabric on chair is also black. 4. What will be the best colour combination keeping in view the kitchen, sofa etc in mind. Pl advise.... I

A soft, warm grey shade would look lovely, and can be as dark or light as you want. A warmer shade will work with the brown stained wood floor, and the grey will complement the black granite. You could have an undertone of green, blue or tan if you didn't want a pure grey. And it would look nice with any silver metal hardware, either polished or satin/brushed, so you could choose pewter, chrome or nickel. It would still work with white trim too.

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Manpreet, Congratulations on your new home! You can go with BWP ply with laminates. You are right in your choice of matt and glossy laminates for base and wall cabinets respectively. Without knowing your tastes, I am taking a chance to suggest you 14541 for base and 21187 MR+ from merino catalog. It looks good. Thanks, Nitin CORNERSTONE DESIGNS Bangalore.