- Changing from your existing masonry fireplace to the linear gas fireplace in the photo you posted a link to would likely be fairly expensive, as it would require removing/modifying the masonry of your existing fireplace, but there are other approaches you might consider. One of the keys to modern is minimalism. You might try keeping the appearance as uncluttered as possible - perhaps by removing an existing mantel or stripping away other elements to leave only the most essential parts. If it is a wood burning fireplace, the building code requires that you leave non-combustible hearth protection in front of the fireplace, but you might be able to change the hearth material to make it more modern (pink wall with hearth flush on floor). The other thing you might consider is changing over to a modern gas burner, with glass media or stones (first photo, with black mantel). There are gas inserts that are beautiful as well last photo with stone wall), but the investment goes up when you get into a full system with firebox, surround, venting etc. If you have a photo of your current situation, we might be able to tailor our suggestions to be more helpful.

I like this tile as well. Very sleek and mod looking. I would consider running it vertically instead of the picture horizontal pattern. It might give the illusion of more height in the shower surround. The color is great. If you are worried about it being "too much," you could always see if they have the same tile in a different shade and mix the two or doing one wall in a contrasting (lighter) color. I personally like it as long as you have good lighting.

Yep painting over paneling usually doesnt look great but painted paneling is what wainscotting is so it could work. have you considered tile instead of flagstone for the fireplace? especially if you are going modern - flagstone isnt usually considered modern . as far as the kitchen - you can get an estimate for the cost to remodel the kitchen for your new home at www.remodelormove.com. Good luck!

HI there, Yes, our site can't upload renderings unless they are jpgs or png, so i have converted them for you..