1.When to Pull the Trigger The first step in calculating your ROI is to examine your existing lighting. It might be strange to hear this from a company that manufactures LED fixtures, but the technology is not the right fit for every facility and budget — at least not yet. Project managers should be wary of any company or salesperson that tries to claim otherwise. The next decade will likely bring new capabilities and cheaper technology. If you have a facility full of modern fluorescents that are well-placed, you may be wise to switch to LED fixtures in phases. Begin with the areas where LED light can have the biggest impact, like high-volume production lines, warehouse aisles, cold storage and cranes. These areas can suffer significant productivity losses when lighting goes out and stopping production during normal shifts is not an option. The best results from a full LED retrofit will be seen in facilities still using metal halides or other high-intensity discharge lamps, as LEDs have the potential to cut lighting-related energy expenses in half and decrease overall energy use by up to 50 percent. 2.The Site Visit: They Should Come To You Once you’ve decided on an LED retrofit, the first step is a site visit. There is no universal standard or equivalency formula that ensures quality coverage when switching out metal halides, flourescents and LED fixtures. Each type of fixture distributes light differently, so a 1-to-1 fixture swap rarely produces the ideal coverage. Because of that, any responsible lighting project design should begin with an in-person inspection. Light levels are impacted by a variety of factors including placement, obstructions, wall colors and the amount of dirt and dust present. The same plan won’t work for a cold storage facility in Houston that works for a manufacturing plant in Kansas, even in a building with the same square footage.If companies offer over-the-phone or over-the-Internet quotes based on the idea of equivalencies, they are offering rough estimates, not guarantees. On the other end of the spectrum, specialty firms also charge exorbitant fees for engineer-designed layouts. Good project management includes a no- or low-cost site visit in your scope of work and a specialized layout that is part of a larger project management cost. 3.A Good Quote: It’s a Workhorse, Not a Unicorn There are three key elements to project management: quality, service and price. Every manager wants the unicorn — a company that delivers high-end products for a low price with services like installation and rebates. But that’s not a sustainable business plan. If companies promise you the impossible, or even just a high-end fixture at a bargain price, they’re probably stretching the truth to make the sale. Be leery.Instead, a good quote offers expert advice, outlining how you should devote your project resources to maximize your ROI. If your budget is limited, or allocated over a five-year period, then a strong quote will include installation in phases. The quote is your blueprint, so it should focus on your goals and resources instead of offering canned options or simply replacing halides or fluorescents. A well-designed LED layout will account for changes in light distribution because LED output is more focused horizontally and vertically than light from older technologies. You’ll likely need grid adjustments involving electricians and other contractors. Aside from seeing your goals and having a clearly articulated implementation plan, a strong project proposal should also spell out who will take responsibility for everything from electricians to contractors to scheduling. If the contract is unclear or the sales reps sidestep the issue — walk away from the deal. It’s more valuable to pay for good service than to pay twice for bad service. 4.Installation Done Right: Avoid Costly Disruptions The most important question to ask a potential project management coordinator is “Can you guarantee installation that minimizes work interruptions?” Paying for project management is valuable, but only if the project management works. Demand a single point of contact, accessibility during installation and confirm a clear plan of responsibility for potential delays. Installation is one of the hidden costs of retrofit projects. On paper, coordinating your own retrofit installation reduces the project costs, sometimes significantly. In practice, your own lack of expertise can cause hiccups in the process that can cost valuable production time and staff time, and reduce the overall quality of your LED investment.It’s essential your project manager understands local, statewide and national energy codes. This is a key detail that may help you weed out the light bulb salesmen from the lighting experts. If no one is talking codes, then you’re more likely to be left with a liability than an upgrade. 5.Closeout Procedure: Don’t Walk Away Before You Measure Before you end the project, the company you hire should come in with reliable technology and measure the new light output in your space. If you don’t hit your foot candle goals or if the occupancy sensors aren’t working properly, your point of contact should make it right, at no additional cost. The final step in the close-out procedure – the rebate – should also be free of charge. Rebates can cover up to 50 percent of your total project costs when switching from an older or inefficient system. Push back if your project manager asks for rebate fees or guarantees a rebate as part of a price reduction plan. A rebate is an estimate and it’s critical to understand that rebates are not guaranteed. Local and state rebates can depend on the money available to the issuing agencies or factors outside the scope of your project. Utility providers qualify the availability of funds only at the start of projects and typically must visit your facility to validate the existing system compared to the LED system being installed. Relying on remaining available rebate dollars that may be exhausted prior to your approval and start date may leave you frustrated with your project. When you are ready to speak to someone about a lighting retrofit for your facility, contact our professionals at Worldwide Energy. After explaining the process of upgrading your lighting, you will see that our practices follow Mike’s guidelines laid out in the article. When you work with Worldwide Energy, you get an experienced and efficient team working hard to provide you with the best service available.

Hi Nikita, First and farmost, you have very beautifull coushion on sofa, from where you buy it? You can check the videos of Small budget Big makover first session series in youtube. In One such house in Gujarat, Muninder and Bishakha coloured the old sofa set with whtie (The sofa is like yours) and changed the centre table. Interestingly, the family also had your kind of sofa set and they also want some modern style. The architect duo did not changed the sofa, just changed the colour. Yes I found it in youtube. it is the house of Setu Upadhyay. the link is https://www.youtube.com/watch?v=85GNhyLeVnM Another suggestion is that you have many tables on the room. You can drop few chairs and opt for a single centre table

I don't have a pic unfortunately. My parents spent a long time in UK and naturally brought home some influences. I still remember the Little Woods book that my mother would go through and take ideas for some of the furniture. And the most important influence of course would be of using wallpaper. All our rooms were wallpapered end to end as well as the ceiling of the living area. And of course her focus on keeping things neatly and beautifully.

The days when our homes were not as intricately designed as the rest of our lives are a far cry now. Today nothing is a better representation of our selves than our own home is. This realization that our home needs to be a space of self-expression as much as say our clothes are or our mobile phone covers, has led to an unprecedented increase in the interior designing industry over the last decade. Following this new set tradition, there are a lot of top interior designers in Mumbai who can help you get your dream house done and dusted. Here’s a list of some of the key points that you need to keep in mind when you are getting your house done the way you want it to be. Do your Research – the first step to most of the things in life is to do your research. And interior designing is no exception to this. Keep exploring, eventually you will stumble upon an image that would be an exact depiction of what you had thought about for your house, or at the very least you will find something that will be the ghost of an idea and looking at it, you will suddenly know what it was that you have always wanted for your home. Go through designers’ portfolio – once you have an inkling of what you want, the next step is to find somebody who will be able to help you to extract that idea from your head and superimpose it on your house. This is where you go ahead and look for the best architects in Mumbai. Go through their portfolios and see which of them seem to you to be the one whose style matches the one you want your house to look like. Plan with your designer – get a taste of the trending home interior design Mumbai, and get planning with your contractor. Share all your ideas and make sure to get their professional insights on what would practically be the best for your home. Trust their opinions, and find a way to balance them with your instincts. Together, you can easily figure out a perfect combination of things to do in your home. Don’t be afraid to experiment – Go for something you have never done before to your house. Experiment. It might end up looking better than you could have imagined. Or it could end up looking hideous. See, that’s the thing about renovating. By its very definition, it essentially never has to end.