Please forgive my comments if they are not applicable as it is difficult to read the plans from my computer and I am unable to enlarge them. I live in America so I recognize the difference in cultures but just a few things you may want to consider: The kitchen appears to have windows that have a view to nothing significant, whereas if it was on the opposite side of the house, the views would be of the lovely garden. Also, the kitchen appears a distance from the garage, where the grocery/shopping items would be carried in from. I believe a better location would be somewhere closer to the garage with easier access to transport items. Another consideration is the idea we call a "Great Room"--whereby the kitchen is open & next to the living room. This is a beautiful layout conducive to ongoing conversation with guests & family members alike and much prefered to cooking in a room alone, separated from loved ones. Since the house is multiple levels, I would recommend placing the laundry room (washer/dryer) on the level with the most bedrooms. This allows for ease of accessibility vs. up/down multiple stairs to transport dirty/clean clothes. Best wishes to you! I think you are wise in soliciting suggestions/input now as there are many changes I still wish I would have made. :)

Hard for us to say because we know virtually nothing about you or how you live! I would think about what I want to do in the condo, who will be there, what activities we will be engaged in, then make a decision on those points. Good luck!

Hi Fathma, In the wet kitchen I'd suggest you have a bit more space infront of the washer dryer if you intend it to open into the room - or you have it opening facing the door - you need at least 1m crouch space infront of an appliance like this - also make sure you keep walkways clear enough so that you can replace larger appliances if and when they go wrong. In the main kitchen I think you might need a bit more clearance between the peninsular and the sink /hob wall. I'd suggest 1m to 1.2m if possible. Not sure where I the world you are - but check with your local kitchen supply people that what you intend to install is agreeable with local build code - this differs from county to county ! Enjoy your new kitchen when it's installed ! :-)

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.