I would not mix LED and CFL they have different looks and LED s are much cheaper to run. You can find a fixture you like and switch out most with LEDs, we have been slowly changing all of our halogen lighting to LEDs now that the LEDs come in higher wattages. We have 70 halogen lights in our house so I am doing 12 at a time, love the change. I like the fact that you can have a lot more lights off the same circuit too.

OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

Hi Puspa, Here are some ways in which you may convert an existing wall into a brick wall - 1] If you are alright with replacing the existing wall entirely, then terracotta bricks are your answer. A terracotta brick wall gives a rustic buy neat finish as compared to the conventional brick masonry. However, this would require major civil work. 2] Another way is to strip the existing wall of its plaster and expose the underlying masonry. You can protect this masonry with a lacquer coating (your painter will help you with that). However, this again required some amount of civil work. 3] If you want to work with the existing wall without breaking it, opt for cladding materials. You may go for brick like cladding materials like terracotta wall cladding. These come in a variety of colours and are easy to apply and maintain. They come for both interior and exterior applications. 4] Punning is another way of achieving the desired look on a wall. The painter or false ceiling guy can help you with this task. Basically he will pun the wall in pop and engrave grout lines so as to give it a brick wall look. 5] Lastly, you may go for brickwork looking wall paper or a 3d panel. While a wallpaper would look flat and unconvincing, a 3d panel would do the trick. You can either paint on the 3d panel or leave it as is. As far as procuring items locally is concerned, I am sure a local vendor or contractor will guide you through. Regards, RnD Atelier Nagpur

Hello Amruti, Posting images of a project done by me which has a breakfast counter & opens onto the dining, its to give you an idea on a concept of open kitchen. The design style can be changed to ur aesthetic sense.. Thank you.