In recent whole house remodel , we have come up with a good size closet in master bath. We have90" vanity and medicine cabinet. I am looking for ideas to put organizer In this closet , ts behind entry door for bathroom. I have ordered bypass mirrored door for it. Thinking to put pull out laundry hampers, where can I buy those? Wht else can be done?

I hv made replica if ds in my new flat but nw confuse wd the handle as the inspirationl pic dosent have any and I dont wanna ruin d simplicity of this tv unit .plz suggest what type of handles will go with it plzzzxxx

Thanks for both of your responses CUBSpaces team and Shweta from Shades studio. It really gives a clarity about possible consequences. I am now doubt free about changing whole things in Bathroom as it will be interconnected. However will appreciate your opinion on few things: 1. Kitchen wall tiles: I have those from countertop height to roof(almost area of 6X15 feet) which are good and not hollow. I changed countertop 5 years back without any damage to these tiles. It might cost me another 10-15 K, but I feel the whole process and quantity of wasting old good tiles makes me little sad. 2. kitchen countertop: Made new around 5 years back. I don't expect to get it all intact. But large pieces can be cut and can be used as top for other freestanding structures like dishwasher, front load washer, heighten base cabinets, etc. 3. Plywood: I don't mind giving enough labour charges for old sheets recycle. I am planning to use doors, loose sheets(like kept on bed frame of settee frame.) or parts of big frames like settee. I am keen on reducing waste than to save money. You can see various DIY ideas by western people, who remove or sand laminates and re-paint furniture, or carefully remove hollow tiles and re-attach them. Some are also re-painting ceramic tiles. I am just asking myself: Are we creating more and more waste by use and throw approach every 10-15 years, just because we can afford it?

'Pros' are that the finish looks sleek and seamless, especially when all the shutters are finished in the same colour. The 2 main 'cons' in the case of handle-less shutters is that 1. greasy finger marks can appear on the front face over a period of time. 2. there is a high probability of the user trying to pull at a shutter on the side where the hinge is. Handles allow the user to immediately see in which direction a shutter (or a pair of shutters) will open. If there are no handles, it is hard to tell and over a period of time the hinges could come loose. This is also the reason I don't fix the handles in the middle of the width. It was very fashionable to do that at one time, but it is just plain inconvenient