Can you provide some more information about your question? A photo of the room perhaps?

I have a sitting area cum dining area of 300 sq ft which is adjacent to my kitchen ( 120 sq ft ). Over all colour theme is white and in STRAIGHT LINE. All cabinets in the kitchen are of white colour with grey Italian tiles and Siemens equipments. Have bought off white (leather) seven seater sofa with a coffee table with a frosted green glass top. The area left for the dining is approx 90 sq ft. My questions are : 1. Should i go in for a square dining table with six chairs or eight chairs. What should be the area of the top. 2. Should I go in for a rectangular table with six chairs or eight chairs. What should be the area and size of the table top. Have selected one with an area of 21 sq ft with a frosted green glass top. The fabric on the chair uses is black. 3.should I go in for a round table. What should be the dia or radius. Have selected one six chair Armani casa table with a radius of 2.5 sq ft. It is black in colour. The glass top is also black and the fabric on chair is also black. 4. What will be the best colour combination keeping in view the kitchen, sofa etc in mind. Pl advise.... I

Hi Manas, There is one option i.e. if you don't want to do any major changes you will have to take the wiring from sofa wall till TV wall and you can hide it using conduit. Or You can take a grove from one wall till the partition wall and get it filled. Partition is supposed to be a ply wall of 3 inches which will have framework in center and ply on either sides. We are attaching two reference images one with designer panel and one with plane. You can use whichever you like. We hope this will help you achieve your required design. In case of doubt, queries are most welcome. Best Regards Team Offroad

the board is installed the wrong way to start with. it should be horizontal to achieve the rustic look. why do you need a painter for such a small job? try to remove the existing finish with mineral spirits or a heat gun. apply a coat of white acrylic primer and sand with 300 grit paper once dry. clean with vacuum. apply a coat of dark grey emulsion. dry. then spray a coat of white automotive laquer very lightly. usually thus dries quick in 30 minutes. very carefully sand with 400 grit on the grains and you will now have the desired finish. cost of materials approx 1000rs.