Madam, I don’t have a drawing. However, I can draw and send it across. Sorry for advising, however my suggestion would be: 1) Check the tube level of the wall for plaster. 2) Ensure that the plaster is even 3) You can ask Asian paints home solution for a coat of paint. Don’t look beyond a cement colour. 4) Leading upto the wall have it decked with wood; meaning deck wood flooring. This will accentuate the floor. 5) Buy a Buddha resting on a pedestal. The Buddha must be sculpted in stone. Take care that the face is natural. 6) Get a Carpenter to make a frame work on all four sides with teak and give it a natural finish. 7) Bodhi tree must be silver/ gold finish and must cover atleast 40% of the wall. 8) Have two focus lamps from the top and one warm lighting from the floor level. 9) Just one pot with either artificial or natural bamboo with a few green leaves. Lo and behold you will have the most beautiful entry into both your bedrooms. Useful for meditation as well. 1) Bodhi tree- Mantra Arts, Chennai. I am chennai based and hence no idea of other cities. 2) Pots-try Poettery, Gurgaon. True masterpieces. Regards, Prakash.

A typical partition or anything on the floor may make the space look constrained. I'd suggest you just use a different finish of flooring to partition the space...for e.g. you can have wooden flooring installed on top of the tiles in the area where the sofa is kept - to the human eye this will both partition the space as well as maintain the spaciousness.

warm light will create an ambiance.. and not white lights.. either u can change the bulb.. will be good.. if possible..

I have the same kind of bathroom and saw the same video. I used an angle grinder to remove one of the walls. You have to have hearing, breathing, and eye protection. I don't think there is any way to avoid the dust. I'm going to direct a fan to an open window in the bathroom. My sinks are top mount so there was no problem removing it. I replaced the faucet only for now. I also changed out the drain and stopper. The old one was rusted to the sink. I had to bang on it with my loader from my tractor with the sink upside down to get it off, lol. I have put off removing the rest of the wall and the cabinet because it is such an ordeal. You might check with Daltile to see if they still make the tile. Maybe try cutting away the cabinet while keeping the counterop supported and then dropping it so that the joint gets more exposed? I'll be interested to know if you get to this before me but I'm doing an entire gut job.