softyjain, If the windows need to be replaced I recommend looking at fixed steel to maintain the narrow profile of the windows and small window lites. Using fixed instead of operating will be a cost savings if you don't need to open them. Another option for hanging from the ceiling is a decorative light or chandelier. That way you still have light into your ceiling at night. We offer Renaissance solid bronze windows that don't require any finish or finish maintenance. Architects designers love the rose bronze color, which closely matches copper gutters. http://www.houzz.com/projects/152134/Renaissance-Solid-Bronze-Windows---Doors-by-Progressive-Solutions You may also be interested in this ideabook- http://www.houzz.com/ideabooks/18543834/thumbs/Bronze--Copper---Steel-Window-Ideas

Nickel can patina over time and I don't often like the look of the bronze with a stainless steel sink. I'd go with brushed stainless steel or chrome.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller

Dear Mr. Gupta, I must appreciate your decision going with natural stone flooring. You have followed the right path to design. As for granite, what you've looked at is an wood grain natural granite. Natural granite come in all range of lighter shades - try galaxy white, wood grain, Norwegian shades of whites and creams etc. They all go very well in flooring as they need extremely low maintenance and take a good polish. But since you have opted for flooring, try a flamed or leather finish. However, natural stones could take up stains very easily. It is therefore recommended to choose Indian granite (harder and non-porous than imported) in off whites to conceal any stains. Regards, Aurum Ideas and Spaces Bhubaneswar