the back wall panels look like ikea besta doors. the hanging cabinet could also be besta boxes, but with customized doors. the console in front of it, you could get a similar look by using a malm console table and cutting it to height. from there you'd want to use a couple of besta cabinets to create the closed off storage. the low bench could be made with plywood and then stained or painted to match the finish of the malm/besta combo you choose. besta cabinets :: http://www.ikea.com/us/en/catalog/categories/departments/living_room/11794/ malm console table :: http://www.ikea.com/us/en/catalog/products/80196480/

Thanks everyone, I'm planning to get my floor tiled up soon, and then later the whitewash. So before all that, I wanna do away with the construction part, if required to transform this hideous corner. I had the roller blinds in my mind to hide these iron windows, but I will also look at options for changing them windows entirely if budgets allow. I might have to use some false ceiling work as well. Posters, I don't think can find space here, but a lounger sofa-bed is a surething with some nice lights. Please do share some pictures of the lights and loungers and floor tiles if you may, for suggestion. I'll be obliged. Thanks again!

Thanks. Somehow I did not have luck finding good carpenters, Here is how I wanted the drawers to look. Here is how carpenter from my locality (not too cheap a neighborhood, called Lokhandwala) tried to make, A you can see, he tried to chisel the wood to get this design. Obviously had no clue. Finally he gave up, Brought the unfinished desk in with an excuse to show me how it is coming along, left it with me and never showed his face again. So I tried an expensive carpenter, who did some work at an apartment on NapeanSea Road, a very expensive locality and paid him what he wanted. He too did not know how to make this. All he did was out a moulding in the center to make it look .as though it were similar to what I wanted. At least his work was clean, except that he represented that the top was teakwood while I lter found out that it is mango wood, but he too did not know how to get this done. I hope one of you can suggest a carpenter with some skill.

I have been struggling as a homeowner who is off on medical leave with watching a 3 day install by one of the 2 big box retailers on 2 59 x 24 vinyl Pella casement windows. I found the 50 foot roll of Pella Smart Flash in the garage after installation then realized they used the cheap red house wrap tape to seal the nailing fins then put the 4 inch cedar trim in and not have the proper caulk (so the cedar is not caulked 5 days after start of install and we have had thunderstorms every day but one it will rain 3 more days). I called em on it and got red tape is fine, then me demanding otherwise to "it was temporary we where going to rip all the 4 inch cedar trim boards we placed around the windows off". Mind you they cut back 12 inch Skirl cedar siding to get at the fins but then why where they going to caulk it if it was temporary. So they put the windows in and nailed em over the OSB not replacing the 4 inches of barrier when they cut thru the felt then placed the red tape over the fins and OSB). I think they should have set the saw shallower not to cut the felt? Do I need them to pull the windows out to put splice in some type of 4" barrier as I told them they should? They agreed pull the 4 inch trim off anyway to replace the "temporary" tape. Should I ask for new cedar trim boards as they will take em off with nail holes and possibly break? What about the rain getting under/in the uncaulked cedar trim(the cuts are tight thank goodness) its going to rain all week is it ok the uncaulked trim boards are getting steady rain for a almost a solid week? They showed up asking if they can use my ladder ok no longer, they did not have caulk asking me if I was going to caulk the second story windows(I am on crutches), having to reorder interior oak they did not have enough, did not have a vacuumn asked to use mine, and here i sit with windows as the rain pours down the west side of my house and windows not caulked waiting for my hip to heal. Thanks for the help! Just really disappointed in the whole job and one window does not even close easy at all I have to jack around with the crank, he said the trim was too tight he will cut it back.