please mention pattern and texture too if possible ..thank you

Hello, I feel that you can design this bedroom by having 1 opaque wall at the back, and 3 transparent walls using glass & steel or glass & wooden french doors. The walls should be white, with minimal accents of blue or green, use 2 layers of curtains with sheer, and brass hanging lamps. All doors can be white PU paint. Waterproofing this bedroom will be essential, so make sure you have sealed all joints and surfaces, with a minimum of 2 feet roof overhangs. Hope this helps! G

Hi, I am from Assam, Guwahati. Yes it is warm humid place with lot of rains (like kerala). The bookcase is gradually drying. Fortunately last few days were very sunny and airy and my room has two big windows. Few mor details of my bookcase. It is 8 feet wide, 6 feet tall and 11 inch deep. It was attached with wall with 6 wall screw and has four pair of legs.I ask the carpenter to divide the bookcase into 3 part (32 inch each) and two door system for each part. Every part has 6 shelve from top to botom. There is no plywood or wood in back. I made it that way because the bookcase is attached in my room's inner wall I understand that the bookcase may have very little gap in between wall and wooden planks and i am ready for it. But I have no idea that beacuse of faulty mesurement, it became 1 inch gap between wall and sheve in the upper side. In lower side it is very minimum gap. I stop the carpenters to put the glass door. But now I see that they also make fault in making the doors. The doors are heavier that the shelf. The wooden planks are 1 inch thick while the door are 1.1/2 inch thick. I actually visit few hardwere shops here, but most have no ideas what to do and few says to apply wall putty to fill the gap. But my back wall is coloured (old wall, that why) and wall putty will not set on old wall and timber. I cannot remove it now from the wall otherwise the wall may destroyed. I really need a step by step guide now that what to do after the heves are dry, how to fil the gap and how to put the door without further damaging the shelf.

Hello, You may have to remove them , take them to nearest timber get them planed and then reinstall. after planing you may have to buy few additional pieces to cover up the material lost in planing. Otherwise, If the gaps are not very big you can try filling them with metal paste or wood putty.