OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

the back wall panels look like ikea besta doors. the hanging cabinet could also be besta boxes, but with customized doors. the console in front of it, you could get a similar look by using a malm console table and cutting it to height. from there you'd want to use a couple of besta cabinets to create the closed off storage. the low bench could be made with plywood and then stained or painted to match the finish of the malm/besta combo you choose. besta cabinets :: http://www.ikea.com/us/en/catalog/categories/departments/living_room/11794/ malm console table :: http://www.ikea.com/us/en/catalog/products/80196480/

I'm a Certified installer for Trex decking. Trex Transcend is encapsulated board, with a finish that resists staining, scratches, mold and has a high definition wood grain surface. I don't know what you did to it or whoever worked on your house did something to it, but Transcend decking does not need staining or painting and the protective shell protects decking against fading. Trex Transcend and a few other Trex decking products like Trex Enhance, and Trex Select, they cannot be painted or stained. The only thing can be painted is Trex Transcend White Railings and you should only use light color paint. If you use dark colors, it will absorb heat and it will damage the surface and you can kiss your railings good bye. Also high quality fast drying primer should be used and you have to use Oil or Water based exterior paint and most importantly surface prep is the the key. When it comes to painting specialty surfaces like Trex Railings, hire a Pro to do the work. With that said, if you installed Trex yourself, you have to go to the store and have a Trex representative come out and check your deck. They will determine if loss of color fading was due because of negligence or not. If its a material defect, they will cover the material cost. If you had a Certified contractor do the work, they will cover material and labor. Call your contractor and he will get a Trex Rep to come out within a few days. Good luck

Keya, glad you decided to take the one reader's idea about moving the armoires in front of windows that you don't need and giving the bed a wall of its own! And, yes, you can have Roman shades on one wall and layered drapes on the other. When I had drapes made for my tall sitting room windows/doors, I had them use the same fabric for the Roman shades for the smaller windows on the other wall. For me personally, in these older Indian homes with all the odd nooks and niches in the walls, perhaps it would be more soothing to have a light/med tone paint on the walls that blends with the drapes/blinds for an 'uninterrupted' look, and I would use the same color on ceiling and beams. (but that is just my thought) I would start the process with a large carpet with your favorite colors, then choose your Bedcover & cushions, then your wall paint and fabric for drapes/blinds ..Not certain what style you like, but if you really like a particular Ethnic bedcover fabric, you can always have them stitched into curtains or Roman shades too. Can't wait to see the "After" pics!