Not really sure what you're asking. Interior door? Exterior door? Every door is made from different materials. Solid core is different than hollow core. Some are fiberglass. But your basic water based paint works on most doors. Doors are usually painted in a semi-gloss finish as is trim.

Good tips.

The wall is stunning and creative, but sadly, I have to agree with the consensus expressed on all your threads: this wood should have been bone dry, carefully checked over piece by piece for holes, insects, existing fungus etc., and probably treated and certainly well sealed before before being installed. At this point, I would cut my losses and take it down. Once the pieces are all down, it's possible that if you thoroughly scrub off all fungus with a bleach solution, then let them dry bone dry (preferably in a wood kiln or perhaps a DIY drying shed), then treat and coat, these pieces could be reinstalled. Even that depends on the conditions they'll see - if this wall is exposed to lots of steam or grease you'll be having new issues before long. Also, is the wall itself dry and solid? Any chance water is leaking or oozing from somewhere and adding to the issue? What species of wood is this? Some species are naturally more fungus resistant and appropriate for this than others. Long story short, I'd recommend finding a different way to cover the wall - with ceramic, galvanized metal, or with a really scrub-resistant paint.

It took me ten years to figure out as an adult why my allergies are non stop when I visit my moms custom home. This morning I figured it out. Pine floors. We eliminated feathers, my seasonal allergies and there are no other triggers apparently in this house. I have to take the max allergy meds per day to be here. Treating the floor did not stop this from.happening to me as my allergies are severe. So heads up guys, people can react to the wood flooring even after its treated