One possibility would be to swap the living room and the dining room. Since the current living room is larger than the current dining room you could still keep some comfortable seating (couch and upholstered chairs?) against the front wall for a keeping room/dining concept. Then your new dining areas (kitchen and dining room) and living areas (living and drawing room) would have good flow between them, which would work well both for family and entertaining. You could also add some builtin bookshelves in the drawing room or new living room to create a library area to add another fun element to the living areas. These bookshelves could be against the long walls in the drawing room, around the window with a window seat in the living room (former dining room), or built to create some separation in the open area between the drawing room and living room/stair area. Your plan seems to show some sort of builtin there, but I'm not sure what it is.

OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

Prior to engaging or facilitating house visitors, a couple of things ring a bell clearing and cleaning up the home, loading up on staple goods and different basics, and holding spaces for your guests to feel great and right comfortable. Regardless of whether it's for a night soirée or for a guest remaining over the whole end of the week, the visitor restroom should be as welcoming and tidied up as could be expected under the circumstances. The ledge off the entirety of your shower and magnificence items while additionally adding a new load of hand wash, towels and different fundamentals your visitor may require. Master TIP: Add consistency to this space by trading marked cleanser gadgets with a straightforward refillable one from a home store. Extra focuses for incorporating a coordinating container with hand moisturizer. On the off chance that the ledge feels too unfilled, tidy it up with plants.

Hello there, So much of discussion for the thickness of plywood? It always comes down to load bearing and shear strength (MOE and MOR) which is ensured in thicker plywoods. Hence, 19mm is apt for wardrobes. Second, doors should be of 25mm bloackboard / 19mm plywood but edge banding must overlap between laminates to prevent peeling/warping. Hence edge banding must be >=25 mm. The carpenter's choice for going slim and saving will result in you being penny wise and pound foolish. Regards, Aurum Ideas and Spaces Bhubaneswar