yvonne, yes i guess we can use it in the dining. The dinining room is small and doesnt have any windows. the kitchen has a lot of natural light that will come across to the dining due to the open kitchen plan. We will be buying new furniture for the dining. We could buy a glass top table with wood chairs / wood table with wood chairs. The room will be painted offwhite similar color as the base of this fabric. All walls will be painted the same color by the builder, Afer taking possession of the house we can repaint it where needed for accent wall etc. Its an appartment, we live in India.

So you're running two threads on this space? I think you'll be happier with the responses if you stick to one thread for the entire makeover, as it is all inter-dependent - foyer - living - dining. Now that I know that the living dining are together I'd suggest you use measurements from the blocked space above the windows to determine stripe width in the dining space if you go with the wide horizontal stripes I suggested. The pattern is already set for you if you take the measurements. You could also make the stripes the width of your lower window section, or half of it, but use the horizontal lines already in your space to determine the other stripes you may add.

I have some suggestions if you are thinking budget friendly changes. Make a photo gallery with different size frames and arrange them parallel to the stairs, so you can enjoy each photo as you climb up. And for the area that will be on a level with your upper floor, try some pretty decal that will connect the photo gallery to upper level. And last, if you have budget add some beautiful hanging lights in the stairwell. Also think about repositioning your refrigerator.

Hi Manas, There is one option i.e. if you don't want to do any major changes you will have to take the wiring from sofa wall till TV wall and you can hide it using conduit. Or You can take a grove from one wall till the partition wall and get it filled. Partition is supposed to be a ply wall of 3 inches which will have framework in center and ply on either sides. We are attaching two reference images one with designer panel and one with plane. You can use whichever you like. We hope this will help you achieve your required design. In case of doubt, queries are most welcome. Best Regards Team Offroad