try visiting the program's website and see if there are any issues similar to what you have.

Well from the cover of the book you have the manufacturer's name and the name of the collection, and inside you have the name of the pattern. You need to contact someone who sells this manufacturer's products. Not every pattern is going to be viewable on Google searcj. You need to start with who is going to be supplying you with the product, i.e. the manufacturer or their representative. Here's the contact information for the company in India: http://durianlam.com/contact/ On the durian.com website you can download the Romania collection catalogue too: http://durianlam.com/romania-range-1-00-mm/ Hope this helps.

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Hi Manish, 1- Runners are a better value for money than telescopic channels. Channels have a better load bearing, and have a lock which does not let the unit fall even if pulled nearly out. If you don't see these two as you requirements you can go for runners. Check the load requirements and get a suitable load runner/channel. If you foresee some drawer to be quite heavy then telescopic/quadro/tandem boxes will be better. 2. PVC boards as such do not have any drawbacks for use in kitchen. Just make sure your guys have worked with them earlier. 3. Wire frame baskets are lighter, readymade, readily available and provide more space and also require lesser work. If you are more of a detail cleaner then it will definitely require more efforts for others it requires lesser efforts for cleaning them. It's a subjective opinion. Thanks, Nitin CORNERSTONE DESIGNS Bangalore