I would paint the entire fireplace including the mantel, all trim and shelving white. I like the Whisper White, but you must bring the paint samples into the room to see for yourself. The sheen on all woodwork should be semi-gloss, easy cleaning and looks crisp. I agree with painting the walls and I would paint the part above the mantel the same color as the walls, Summer Hue is beautiful, but once again I have no idea how that would look in your room. The walls should be flat most brands make a fairly easy to clean flat. If the fireplace were the focal point of the room, it could look very cool and dramatic to paint it a very dark gray almost black. But at least in this picture it seems that the entertainment/shelving unit is the focal point. hmm .... better stop while I am ahead.

That looks like natural wood so i wouldn't ever paint it, I would try to match the wood color and use a more substantial wood drapery rod next to it and remove the clock above it. Light jade pieces would be good and shiny too. Something inexpensive would be all green or white/cream Haeger (maybe spelled wrong) ceramic rectangular "planters" usually about 3 inches tall, 2 or three inches deep and 6 or so wide and other shapes also like small vases are easy to find. I think they are from the 40's or 50's so they would match the built-in style. You can pick them up at thrift stores for about five dollars and they have nice shapes. I agree with the other comments that a strong theme rather than random objects are key.

Just a little ceramic information to share as a potter. Vitrified simply means the clay has become glass like by being fired to its proper maturing temperature. Usually ceramic tile means it is a lower temperature clay like earthenware or terra cotta. Porcelain is fired to the highest temperature and is more vitrified if you will. This usually means it is less porous to to absorb water and harder. Low fired ceramics with glazes much darker or lighter than the clay body will show chips easier. Rectified has to do with making the edges precise enough to fit smoothly together for less grout lines. So porcelain cost more to produce but it is more sturdy. All clay tiles should be vitrified.

I am so happy to see you here! I will have to go back and see if i can retrieve my posts... thought I would make them into a little book for my daughter, with photos. Quick run-down on the bathroom (not travels, no time) - The kitchen has a rather elegant sliding door with beveled glass panels. Painted white, since this was the original colour. GD's new bathroom has the doors I had picked earlier; i thought of polishing them but decided sprayed automobile paint (on a resin primer) would wear better. Especially since it is such a small bathroom, and she is so splashy. I have this finish in my kitchen and it has lasted 15 years now. A tad chipped here and there, but only needs a wipe down once a week. Same finish for the balcony doors, also split like the bathroom. We have a new wardrobe, a study table with built-in shelves, and a small chest of drawers for her odds and ends. I want to re-tile the tiny balcony, more as a little statement. Currently we are looking at Portuguese tiles, though I did think a mosaic with a funky cat might be nice. Let me see the costing. The room will be painted a neutral adobe, with bright white woodwork and an off-white ceiling. This means she can go wild with cushions and covers. Other changes in the flat; We have changed the glass in the master bedroom and living room from small cramped panes to a single pane for each section with a 1" bevel all round. Doubles the cost of the glass, but looks so elegant! The air-conditioning is being re-located. The compressors were all mounted in the bedroom and living room balconies, which looked terrible and meant the balconies (very narrow, only 30" deep) couldn't be used for anything. Not even plants. So they are being moved so that the compressors can be mounted at the rear of the building. two down, one to go. Now we can put in some nice plants, fishtail palms etc. The kitchen counter on one side came out intact and will be reused elsewhere. I am planning overhead storage, cupboards, and a draining cupboard for plates and glasses. Right now there is no dish washer, though a place is earmarked, but for now I will put in a cupboard with steel racks for cups, glasses and plates, all hidden behind pressed glass doors. This is all in the planning stage.... Pictures in a little while, they are mostly on my ipad and don't transfer well to the mac. They come without numbers... so I have to rename the or something. Somebody tell me how to do this!