Are you saying you will be layering a wooden false wall on top of the existing wall to hold the pocket door? If that is the case, you might want to treat the entire side of that new and existing wall ( including the area above doorway) as an accent wall using wood veneer strips. They look like actual pieces of wood plank which have adhesive backing, they come in a variety of finishes and colors...I like the old reclaimed wood look. A diagonal pattern would add extra visual interest, but would be more intense to cut and install. That will camouflage the additional layer and create a beautiful accent wall.

Min lintel height is 7' and cill 3' 6" from FFL.

Rahul, You were advised in good faith about 24 inches door. Because of the bigger size the weight of the door increases and chances of it tilting towards far end of it increases . Wood has a tendency to warp a bit in a bigger door the effect is more visible, You may also need to support them with stronger hardware. And don't forget that bigger doors need bigger space in the room. Make sure you have sufficient space to open them. These are few suggestions that would help you achieve your goal . 1- Preferably use cut hinges made in brass otherwise increase the number of hinges by a pair to ensure load is taken care of. 2- You can reduce the height of doors by using external drawers in the plan 3- Coming to the shutters, go for atleast a genuine Century Winstar or Green Gold board for the shutters.This is a must. No compromises and no alternatives are recommended here. Don't use a ply for the shutter. Keep the shutters always closed and locked and use magnets to hold them in place. 4- Both sides of the shutter must be laminated properly in one go. You should be good if these are taken care of. Thanks, Nitin CORNERSTONE DESIGNS Bangalore

Hello there, You are right about the barn door but it isn't technically one. It seems more like Japanese doors called Shoji made out of glass and powder coated aluminum instead of paper and wood. You could order it from your local fabricator by showing him the picture only. But there's very specific hardware to be considered for the doors. Ask for enox/dorset. Regards, Aurum Ideas and Spaces Bhubaneswar.