like so (sorry took liberty with your pic using paintbrush app). in second tv be installed on an island of a solid wall, remaining wall be of glass: use frosted tempered glass for doors n all.. this way you get another expanse of wall to do loads with n utilize full potential (area) of room.. also providing a wall surface on the back of the tv 'island' wall to the sitting area for say a painting, maybe? plus tehre won't be glare on the tv screen either if it's on teh wall-glass partition.. only issue being the slightly longer approach (i-e through dressing room) to bathroom area, which ain't so bad either.. in ur original plan i don't like how a door is sprouting out in the middle of a great expanse of wall... what a waste..

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

No, not with normal day to day usage but accidents may scratch anything for that matter.However, PU paint is more likely to get scratches in comparison to other hard surface finish say laminates. It requires a bit mare careful handling if you want it to retain the look for a longer time. I am assuming cost cutting is your objective, you can select MDF for wall cabinets. It is quite prevalent nowadays. Thanks. Nitin Cornerstone Designs, Bangalore.

For a #house to be successful, the objects in it must communicate with one another. #InteriorDesign #ResidentialInteriorDesign #WashroomDesign #VanityUnitDesign #Bathtub #DesigningMirror #DesigningIdea #InteriorsNearMe #TibrewalsInterio