were did you get the light fixture
sophiasnow
11 years ago
Featured Answer
Sort by:Oldest
Comments (8)
tuba yavuzer
11 years agoRelated Discussions
5 Considerations When Choosing a Lighting Company for Your Project
Comments (0)1.When to Pull the Trigger The first step in calculating your ROI is to examine your existing lighting. It might be strange to hear this from a company that manufactures LED fixtures, but the technology is not the right fit for every facility and budget — at least not yet. Project managers should be wary of any company or salesperson that tries to claim otherwise. The next decade will likely bring new capabilities and cheaper technology. If you have a facility full of modern fluorescents that are well-placed, you may be wise to switch to LED fixtures in phases. Begin with the areas where LED light can have the biggest impact, like high-volume production lines, warehouse aisles, cold storage and cranes. These areas can suffer significant productivity losses when lighting goes out and stopping production during normal shifts is not an option. The best results from a full LED retrofit will be seen in facilities still using metal halides or other high-intensity discharge lamps, as LEDs have the potential to cut lighting-related energy expenses in half and decrease overall energy use by up to 50 percent. 2.The Site Visit: They Should Come To You Once you’ve decided on an LED retrofit, the first step is a site visit. There is no universal standard or equivalency formula that ensures quality coverage when switching out metal halides, flourescents and LED fixtures. Each type of fixture distributes light differently, so a 1-to-1 fixture swap rarely produces the ideal coverage. Because of that, any responsible lighting project design should begin with an in-person inspection. Light levels are impacted by a variety of factors including placement, obstructions, wall colors and the amount of dirt and dust present. The same plan won’t work for a cold storage facility in Houston that works for a manufacturing plant in Kansas, even in a building with the same square footage.If companies offer over-the-phone or over-the-Internet quotes based on the idea of equivalencies, they are offering rough estimates, not guarantees. On the other end of the spectrum, specialty firms also charge exorbitant fees for engineer-designed layouts. Good project management includes a no- or low-cost site visit in your scope of work and a specialized layout that is part of a larger project management cost. 3.A Good Quote: It’s a Workhorse, Not a Unicorn There are three key elements to project management: quality, service and price. Every manager wants the unicorn — a company that delivers high-end products for a low price with services like installation and rebates. But that’s not a sustainable business plan. If companies promise you the impossible, or even just a high-end fixture at a bargain price, they’re probably stretching the truth to make the sale. Be leery.Instead, a good quote offers expert advice, outlining how you should devote your project resources to maximize your ROI. If your budget is limited, or allocated over a five-year period, then a strong quote will include installation in phases. The quote is your blueprint, so it should focus on your goals and resources instead of offering canned options or simply replacing halides or fluorescents. A well-designed LED layout will account for changes in light distribution because LED output is more focused horizontally and vertically than light from older technologies. You’ll likely need grid adjustments involving electricians and other contractors. Aside from seeing your goals and having a clearly articulated implementation plan, a strong project proposal should also spell out who will take responsibility for everything from electricians to contractors to scheduling. If the contract is unclear or the sales reps sidestep the issue — walk away from the deal. It’s more valuable to pay for good service than to pay twice for bad service. 4.Installation Done Right: Avoid Costly Disruptions The most important question to ask a potential project management coordinator is “Can you guarantee installation that minimizes work interruptions?” Paying for project management is valuable, but only if the project management works. Demand a single point of contact, accessibility during installation and confirm a clear plan of responsibility for potential delays. Installation is one of the hidden costs of retrofit projects. On paper, coordinating your own retrofit installation reduces the project costs, sometimes significantly. In practice, your own lack of expertise can cause hiccups in the process that can cost valuable production time and staff time, and reduce the overall quality of your LED investment.It’s essential your project manager understands local, statewide and national energy codes. This is a key detail that may help you weed out the light bulb salesmen from the lighting experts. If no one is talking codes, then you’re more likely to be left with a liability than an upgrade. 5.Closeout Procedure: Don’t Walk Away Before You Measure Before you end the project, the company you hire should come in with reliable technology and measure the new light output in your space. If you don’t hit your foot candle goals or if the occupancy sensors aren’t working properly, your point of contact should make it right, at no additional cost. The final step in the close-out procedure – the rebate – should also be free of charge. Rebates can cover up to 50 percent of your total project costs when switching from an older or inefficient system. Push back if your project manager asks for rebate fees or guarantees a rebate as part of a price reduction plan. A rebate is an estimate and it’s critical to understand that rebates are not guaranteed. Local and state rebates can depend on the money available to the issuing agencies or factors outside the scope of your project. Utility providers qualify the availability of funds only at the start of projects and typically must visit your facility to validate the existing system compared to the LED system being installed. Relying on remaining available rebate dollars that may be exhausted prior to your approval and start date may leave you frustrated with your project. When you are ready to speak to someone about a lighting retrofit for your facility, contact our professionals at Worldwide Energy. After explaining the process of upgrading your lighting, you will see that our practices follow Mike’s guidelines laid out in the article. When you work with Worldwide Energy, you get an experienced and efficient team working hard to provide you with the best service available....See MoreDid your mother influence your decor preferences? How?
Comments (4)I don't have a pic unfortunately. My parents spent a long time in UK and naturally brought home some influences. I still remember the Little Woods book that my mother would go through and take ideas for some of the furniture. And the most important influence of course would be of using wallpaper. All our rooms were wallpapered end to end as well as the ceiling of the living area. And of course her focus on keeping things neatly and beautifully....See MoreWhat do you like the most about this project ?
Comments (3)I really liked the indirect lighting and the bar light fixture....See MoreYear-end maintenance: Get your yard ready for winter
Comments (0)Just like Santa makes his list and checks it twice, there’s an end-of-the-season list homeowners should review to ensure their yards are ready for winter. Fall and early winter are the time to properly clean up your property so you can hit the ground running once spring comes, says Beth Hammonds, account manager with Exscape Designs, a Novelty, Ohio-based full-service landscape design/build and maintenance firm. Here’s a list of the items you should wrap up before Old Man Winter settles in, according to Hammonds. TURF Ideally, your turf care program should include a nutrient application in the fall several weeks before the ground freezes. For example, Exscape’s six-step lawn care program includes a winterizing fall fertilizer to help the turf get through the long, cold winter, minimizing damage. It’s a great way to help the lawn recover after a stressful summer season. As the weather cools down, mowing should come to a halt. Ideally, your grass should be about 2.5 inches tall prior to the first frost. “The most important thing to note is to remove piles of grass or leaves sitting on top of the turf,” Hammonds says. “If left behind, it will potentially kill the grass and encourage snow mold and other fungal diseases.” LANDSCAPE BEDS You’ll thank yourself in the spring for cleaning out your landscape beds before winter hits. Hammonds recommends removing all leaves, grass and debris from your beds, in addition to cutting back perennials like hostas, irises and daylilies once foliage has died back. Ornamental grasses and small deciduous shrubs also may be trimmed back. In many parts of the country, ornamental grasses are not cut back as they over-winter. In our area, heavy snow smashes them to the ground, so cutting them back in the fall while leaving several inches behind at the base encourages spring regrowth. If spring color is on your mind, it’s also an optimal time to plant bulbs. TREES AND SHRUBS A late-fall deep root feeding allows the trees’ roots to absorb the fertilizer effectively, Hammonds says. She also recommends dormant pruning ornamental trees and some shrubs in the winter. Fall/early winter is a great time for corrective pruning or size reductions of overgrown shrubs. For example, hydrangea arborescens or hydrangea paniculata bloom on new wood each year, so now is an ideal time to cut them back. “You can see into the plant whether the branches are crossing each other, and if limbing up or thinning out is necessary, because the leaves have dropped,” she explains. It’s the optimal time to make sure they’re shaped properly and not overgrown.” PLANTERS AND POTS Some homeowners utilize their planters and pots seasonally for year-round interest. If yours are in use, ensure they are weather resistant before leaving them out in the elements, Hammonds says. If planters and pots are not in use, they should be cleaned and stored for the season due to the Cleveland area’s extreme temperatures. For example, clay pots must be emptied and stored in a dry location or the winter freeze will cause them to crack and fall apart. “Regardless, it’s good to remove the soil and start fresh with new soil every year,” she says. IRRIGATION If you have an irrigation system on your property, be sure it’s winterized before the first hard freeze by blowing out the lines and back flow preventer with the water being shut off in the basement. “It should be done by the end of October because the weather is starting to turn,” Hammonds says. “There’s no need for irrigation this time of year, as it can start freezing at night.” LIGHTING Outdoor lighting is an important part of the landscape in the winter, considering it gets dark by dinnertime. If your lighting system is run on a timer rather than a sensor, be sure to adjust your lighting to turn on before dark. It’s also a good time of the year for you or your contractor to give your lighting system a check-up, Hammonds says. “Wipe down the faces of the lights and make sure there’s no standing water around them,” she says. “If water freezes around a fixture it can potentially cause the light to fail.” WOOD LINES A common winter service for Exscape is cleaning up wood lines by removing debris, brush, fallen trees, downed limbs, briars and “volunteer” plants along the edge of yards that border wooded areas. “This is a fantastic and economically smart way to enhance your property, and it can be done year-round,” Hammonds points out. “It tidies borders up for a clean, finished look on your property’s edge.” SNOW PREP Before the snow falls, make sure your snow stakes are in place, especially around a curved drive, she says. The goal is to keep plows away from the edge to reduce turf-edge damage. PROJECT PLANNING In addition to these maintenance items, winter is the perfect time to sit down with your professional landscape contractor to begin discussing plans for the following year; both small enhancements and large design/build projects take time to plan and schedule with Exscape. “Winter season is the perfect time to think about and plan out what vision you have for your property so we can work together to create that dream,” Hammonds says....See Morepawandeepsohal
11 years agoasullen
11 years agozanthine
11 years agowinniebelle
11 years agosgedela
10 years agoSari Rodriguez
7 years ago
tuba yavuzer