The artwork would be d same height as the cupboard . on side of the plank with the centre just a background of the whole picture put together with black border . What do i feel

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Purvi, What I understand from your post is that you are looking for complete designing of your new home. This section is usually meant for answering queries of homeowners related to any particular section or design dilemmas. Designing by a professional is usually a paid service. Please search for a suitable designer in your location and proceed according to their advices. Houzz also provides you a search option based on location preferences along with their reviews and testimonials. Just a word of advice, please don't walk in the trap of free design services. All the best.

Hello, everyone! I had my kitchen remodeled in 2018. Huge remodel, down to the studs, etc. My husband recently noticed that on one large wall cabinet, the doors had become uneven. Upon inspection, the cabinet is sagging and seems to be coming apart. I've added some photos here to show the uneven doors, what the shelves look like, what we're keeping in the cabinets, and where you can see the cabinet coming apart at the top. This is a three-door cabinet -- two doors on the right and one on the left. I'm planning to contact our contractor who installed the cabinets, but I hope to get some opinions here: Does it look like the cabinet wasn't glued properly? Did we store too much stuff in here? Was it a bad design to have such a large box to begin with? Cabinet is 53" wide, 42" high, frameless, hybrid construction. None of the other cabinets show any such problems. Thanks for any observations, information or opinions you can offer.