One option, I would get a very large rug so that all the chair legs and at least one corner of the sofa is on the rug. I think I would also bring the table set away from the window a little more. I think there is enough space to place the two-seater opposite the table in front of the window. or bring the table forward toward the kitchen ....... With the sofa centered to the large window. They probably will not be opposite each other, but at an angle which is still ok. They might seem more functional for the table set to be closer to the kitchen. Another option is two rugs in wide runners. Creating a walkway through the center of the room. Still thinking the sofa center of the right window. Just some ideas :-)

How do I stain and seal it? Has already been prepped for duco :(

Hello, I feel that you can design this bedroom by having 1 opaque wall at the back, and 3 transparent walls using glass & steel or glass & wooden french doors. The walls should be white, with minimal accents of blue or green, use 2 layers of curtains with sheer, and brass hanging lamps. All doors can be white PU paint. Waterproofing this bedroom will be essential, so make sure you have sealed all joints and surfaces, with a minimum of 2 feet roof overhangs. Hope this helps! G

Thanks for both of your responses CUBSpaces team and Shweta from Shades studio. It really gives a clarity about possible consequences. I am now doubt free about changing whole things in Bathroom as it will be interconnected. However will appreciate your opinion on few things: 1. Kitchen wall tiles: I have those from countertop height to roof(almost area of 6X15 feet) which are good and not hollow. I changed countertop 5 years back without any damage to these tiles. It might cost me another 10-15 K, but I feel the whole process and quantity of wasting old good tiles makes me little sad. 2. kitchen countertop: Made new around 5 years back. I don't expect to get it all intact. But large pieces can be cut and can be used as top for other freestanding structures like dishwasher, front load washer, heighten base cabinets, etc. 3. Plywood: I don't mind giving enough labour charges for old sheets recycle. I am planning to use doors, loose sheets(like kept on bed frame of settee frame.) or parts of big frames like settee. I am keen on reducing waste than to save money. You can see various DIY ideas by western people, who remove or sand laminates and re-paint furniture, or carefully remove hollow tiles and re-attach them. Some are also re-painting ceramic tiles. I am just asking myself: Are we creating more and more waste by use and throw approach every 10-15 years, just because we can afford it?