Hello Raprem, What is purpose the wood. I mean what do you want to make from the wood shall decide the type of wood may be used. Thanks, Amit CORNERSTONE DESIGNS Bangalore

The wood has to reach what's called Equilibrium Moisture Content (EMC), which is different for various areas of the country/world. I don't know about end grain slabs, which is what you have, but the rule of thumb for lumber air drying (vs. kiln drying) is 1 year for each inch of thickness. Moisture leaves the end grain faster than the side and/or edge of the boards, so in your case the drying time will probably be shorter. If it is not dried in a controlled environment your slabs are going to split radially, due to drying too fast.

Hello Rahul, limiting to your query on granite - It is quite a beautiful, natural and hard material. For applications in kitchen, store and balcony they would do good. There are some points you should consider for granite application - - Granite usually occur in dark shades so consider the lighting in the area of application. - Ask the vendor for iron content in any natural stone for avoiding rust marks. - The process of application and polishing is cumbersome but thank god in India, craftsmen are easily available. - Do not go for a elaborate gloss polish to avoid skidding/slippery floors. - It is also advisable to re-polish/reseal them every 3-5 years. Thanks, Nitin CORNERSTONE DESIGNS, Bangalore.

Hello there, The flooring shown is a concrete flooring with oxide paint treatment of Grey. It is called Indian Patent Stone or IPS . Try searching for Athangudi flooring and you will be in for sheer delight. Regards, Aurum Ideas and Spaces Bhubaneswar