There are several companies which can print pictures on tile. This is fine for interior work but the kiln fired method is superior for outdoor use. If you have any particular photos or art, you can transmit images through email, ftp upload, or send pictures to be scanned. This allows wide flexibility for resizing to the installation of your choice and allowing photo editing.

A good tile installer that knows what he is doing, can easily remove that single piece of tile.... carefully replace it with another one. Do you have another extra pieces of the same tile? Do you know what brand and color the existing grout is? That will be more of the issue trying to get the grout match to match up or the finding the same tile (in the same dye lot) if you need to buy another tile. Did the heat cause the break or did a pan bang into the glass? Consider installing a heat resistant Lumicor or 3 Form panel behind the stove. Any flat material that can be sandwiched between two resin panels. 1). Crushed glass. 2). Fabric. 3). Fabric. 4). Fabric.

The backsplash near the hob should preferably not be glass as the heat produced near the stove causes the glass to break due to continuous heating and cooling which makes the glass crack over a few months... Pavithra Praveen Pravisree Kitchens Bangalore

Greetings from Dream Design, As per your inputs we suggest some ideas -Don't go with too dark backsplash as it will make the kitchen dull after some time and kitchen will look smaller -You can go with marble/tile or even the same counter top like quartz if you use in counter top you can same also put in backsplash as currently it's in trend -take white color with some black/grey lines marble or quartz -or you can go with white designer lines with grooving Sharing some reference pictures