The size of the pool is 6m x 25m x 1.35m depth.And we have though of going for 48mmx48mm glass mosaic tiles of different color combination. The reason is that we felt that going for a smaller tile might be too much busy on the overall looks and also too many grout lines would be seen. Wheres as the 48x48 tiles would be much relaxed in the pattern and a bit more easier to maintain. What is your take on this? Thank you in advance.

Go for Asian Paint Re-painting Process Repainting is done when your home is already painted once. It is required when you need to decorate the house afresh or old painted walls are not in good condition. Step I – Prepare Wall for Painting 1. Scrap the old paint using sand paper to remove falkes, loose particles. 2. Fill the cracks, pores, damages using putty – wherever required. Please note – putty is not required in re-painting in general, however one of coat of it can be used if walls are damaged badly. Step II - Apply Primer 1. Apply one coat of primer to smoothen the surface. 2. Let is dry for few hours. Step III – Apply Paint/ Designer Walls. 1. Apply two coat of paint successively after drying the first coat. 2. Or Get your texture/stencil/design work done Please Note- Primer is a must for Designer Walls. Fresh Painting What is Fresh Painting and when it is required? In general we do Fresh Painting in newly constructed home, apartments. In Fresh painting walls are completely rough. Some times in old houses fresh painting is also needed when its wall condition is really bad, damaged or outer layer of old paint is completely broken. Step I – Apply Primer and Putty. Primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted. So primer is always used in fresh painting. Putty is generally used for filling the minor cracks, wholes, damages to level the surface for painting. Putty is a generic term for a material with high plasticity, similar in texture to clay or dough, typically used in domestic construction and repair as a sealant or filler. 1. Apply One Coat of Primer, let it dry for approx 2 hours. 2. Apply One Coat of Putty on Newly Constructed Wall as base. 3. Let it dry for some time let say approx. 3-4 hours. 4. Apply Second Coat of Putty and Let it dry again for few hours. 5. Use Sand Paper for smoothening or levelling of wall surface. 6. Apply Second Coat of Primer after drying the putty. Step II - Apply Paint 1. Get the requested products which need to be used, verify the color code, pour the paint in bucket and mix some amount of water. 2. Apply first coat of paint using roller and brush. 3. Let it dry for some hours and apply the second coat of Paint. 4. Final touchup if finishing is needed. Take care of all above process

My bad. You want the exact shade as shown in the pic. I thought those are just reference images. I am sorry. But all the shades in the pic are different. The one you could go with is white cheese (L177) atleast that could be the nearest resemblance

Hi Justin, the picture shared by you speaks of subtle & restrained aesthetic. Try to build monochromatic color scheme i.e.. shades & tones of same color family for this area for sophisticated look. You may paint a small patch of wall with sample of paint color in "Taupe" or "Beige" in 2 or 3 variations & see which looks better during day or night. Then choose curtains in light neutral tone of same color family. And don't forget to add some accessories to bring the space alive. Hope this helps you. If still in confusion you can get in touch with us for E-design consultancy for this space.