there is many types of support to be used for counter top for long lasting work... as ... 1) brick wall which takes 2" , 4" or 6" thickness space which is not good for below space as we will waste space for storage under counter... this is used where heavy material is used on top of counter for cutting any food items... 2) marble support... which will take 35mm thk space double support... 3) furniture base if the kitchen working person is using the sink properly for washing purpose and the gaps between the sink and counter top has to be sealed properly for leakage free to avoid any damages for below storage, as i will not prefer this in other area... this can be used only in foreign countries...

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Shakeel, We prefer using epoxy as the base layer and followed by silicon on top. It needs close inspection and thorough work as dripping water is a menance later on. Also keep in mind that these will develop gaps after a few years and need a second coating or repair. Thanks, Nitin Cornerstone Designs, Bangalore.

Ankita, What are your deciding criteria. Stainless Steel, FRP, Quartz, Granite are some of the options. SS is used most commonly. Thanks Nitin.Cornerstone Designs.