Sophie, Patricia you are right cleaning the crystals would be a hell of a job. Hence I would like to look at designs like the other pic I attached which is I believe from the e.ion range of Falmec. As I have mentioned before this is a second chimney. The primary chimney hood is above my gas job in the kitchen countertop and is the main and daily area for cooking. This is the secondary area which I plan to use for some quick heating, occasional stir fry etc. The pendant chimneys that I have come across in brands like Elica and Falmec do not require ducting. The filter needs to be changed every 6 months or more. With my kind of usage I am assuming I would need to change it even later. What I am looking for is different brands which have pendant chimneys. Right now I am only aware of Elica and Falmec. I know Siemens and Bosch don't have it. Siemens has 2 models which are like a flat rectangular panel to be attached to the ceiling or false ceiling. But the cost is same as the Falmec chimney. My only respite may be the cylindrical Isola chimney models from Faber or even Hafele which are ip within budget.

Usually when you get side panels you automatically have space on the sides. If you have a full depth cabinet on the top, you automatically have space at the top and in most cases you will have leave at least 1 inch of extra room for the back of the refrigerator, so there is always air circulation since everything is enclosed. In the 70's they use to make a small recessed space behind like Fred said, today you don't have to do that, most Ref have flat backs, recessed wiring, not to mention the supply for ice-maker also comes in a flush mounting kits for the wall... so pretty much everything is recessed and only space you need is for air circulation and 1" is more then enough. In addition, if you make recessed area now and you push ref to far you will never get your doors open so doing all that is a waste of time, in addition most manufacturers starting to make 30" side panels.

I am looking for Glass Hob, Vertical Glass Chimney and Built In Oven. I am getting mixed feedback across different forums so thought to reach here (impressed with some of the pointed comments so far). I am planning to choose between Bosch, Elica, Hafele and Faber. Can anyone please help ? I need to finalize it in next 3-4 days. I am purely going by the brand name (plus my previous experience with Bosch) so preferred the following 1). Bosch Glass Hob 2). Bosch Built In Oven (though it has aluminium burner but the one with brass burner 'Hafele/Elica' has the problem of making utensils black) 3). For chimney they do not offer 60cm Filter less chimney hence thinking to choose between Hafele or Elica. Please suggest if this is the right choice. Thanks in advance

That explains his opinion. Your description until now was for outlay doors. Slideline 16 is capable for 50-60 kg and 18-24 mm doors only. As I said earlier, not a big fan of bottom running sliding systems. Hope it works fine for you. Steel decorative strip is possible . But avoid deep cuts on the door that would increase the chances of bend/warp.