Looking for stainless steel bathroom sinks? Connect with Lottare Inc., a leading manufacturer of kitchen, bathroom and bar products. Contact today! http://www.lottare.com

For the living room, the focus should be the balcony area. So flipping the couch to face the wall and not the dining table will help. Kind of like this pic. Even if you already have the sectional that is in the diagram, you should be able to flip it. In fact a sectional would probably work better than the couch in this pic. I also really don't like the style of this pic, but it showed what I meant, For the girls' room: No matter which bedroom you choose, you should maximize floor space so that they have the biggest play space possible in their room (as they get older you can add desks for school work and such). To get this space, I would give them bunk beds. This configuration gives them an open feel and more storage, essential for girls. You posted two different kitchen designs. This makes it hard to give you advice. I agree with other posts that your sink should be away from the wall. This allows you to have stuff to the left of you (drying dishes in my house), while you wash vegetables on the right of the sink. You need the same space on both sides of the stove, also. At least 24 inches on both sides is good. 36 is better, though. The first design has a nice little countertop space that adds a place for your daughters a space to sit a watch/ talk to you while you're in the kitchen. When they added this to the first design, you lost cabinets on the other wall. This is bad, as the space is already storage limited. Try making the rounded countertop bump out into the living space more. If you play with the shape, you could make it work without losing the cabinets on the other side. It doesn't have to be rectangular or a perfect circle. You can see how this one isn't confined to the floor plan of the kitchen. I think this is what you would need to do to make it the most functional.

You need a different type of wm or dw for mounting on top of each other. You cannot do that with a regular machine. Both of the machines produce a lot of vibration. Please enquire with the manufacturer before deciding to do that. My opinion is not to have a wash basin in the dining room. Can you do something like a powder room near the dining area?

Hi. I hope the counter is thick enough to take the weight of the sink and water. atleast 25mm to drill in the undermount sink clips. Drill clips are available easy, you can look up Blanco and Franke EL undermount clips. If the counter is thin, you risk cracking while drilling, in which case it is better to use epoxy sink clips. A brand you can find in India is Solartime. They are expensive but you can get your local fabricator to make you a dozen clips and get them galvanised to prevent rusting. Do remember to apply silicone sealant between the undermount sink and the quartz generously. I know how you feel, things that are easily done in the west can be a pain to achieve in our country, especially places other than major cities.