Following are my comments : 1.Buying cheaper branded sanitary fittings is only possible when you buy the same in bulk quantities. But I would like to highlight that these are one of the most important fixtures in the stated space. Don't compromise on the quality of it if you want them to survive the long run.(You can go for the Jaquar continental series or change to Parryware) You can certainly compromise on the WC & the WB since even brands like Somany give good ceramic fixtures at relatively low cost. There you can save your bucks. 2. I haven't worked on PVC vanity but can comment that marine ply cabinets also stand well for the wear and tear. 3. You can go ahead with just the glass partition avoiding the cubicle door. 4. Yes you can but the selection should be on the lighter side of the colour palette so that the bathroom should not look more claustrophobic due to its small size(2 m x 3.5m which is normal in today's real estate market in mumbai). Ar. Amol Bhopi AVB Architecture Mumbai 71.

Hi. I hope the counter is thick enough to take the weight of the sink and water. atleast 25mm to drill in the undermount sink clips. Drill clips are available easy, you can look up Blanco and Franke EL undermount clips. If the counter is thin, you risk cracking while drilling, in which case it is better to use epoxy sink clips. A brand you can find in India is Solartime. They are expensive but you can get your local fabricator to make you a dozen clips and get them galvanised to prevent rusting. Do remember to apply silicone sealant between the undermount sink and the quartz generously. I know how you feel, things that are easily done in the west can be a pain to achieve in our country, especially places other than major cities.

Shalabh, Not sure if you know, you can search the professionals here on Houzz based on their locations. Thanks, Nitin Cornerstone Designs, Bangalore.

It can be done. You will be required to make a ledge wall behind the water closet. On the same ledge wall, the closet will be mounted and the cistern will be installed inside. The piping on the floor will be required to be sealed. The new plumbing provision will be decided at the site.