Just a little ceramic information to share as a potter. Vitrified simply means the clay has become glass like by being fired to its proper maturing temperature. Usually ceramic tile means it is a lower temperature clay like earthenware or terra cotta. Porcelain is fired to the highest temperature and is more vitrified if you will. This usually means it is less porous to to absorb water and harder. Low fired ceramics with glazes much darker or lighter than the clay body will show chips easier. Rectified has to do with making the edges precise enough to fit smoothly together for less grout lines. So porcelain cost more to produce but it is more sturdy. All clay tiles should be vitrified.

Hi Rasa, Nice to hear from you and I’m glad I was able to give you some inspiration for your kitchen tiles. I’ve included another image for you to look at that shows more of a farm house style kitchen with the coloured tiles. If you worried the coloured tiles might look too contemporary for your space, I would advise going for quite soft, muted colour tones to give you the same effect but in a more rustic style. You can see in the attached image how they have used a soft sheen, textured tile in neutral tones, with a subtle hint of colour to be in-keeping with that farmhouse feel. For your tile colours, you could pick up the off white tone of your cabinets with the grey in the granite, and a very soft hint of green or blue to add a little colour to achieve the same look for your kitchen. I have also added some paint swatches below you could use as reference for tile colours to help you visualise the combination. Off white: Greys: Blue or Green: Hopefully this answers your questions for you and I’d love to see some pictures when your project is finished. Good luck with the decorating. Paola Dulux Design Expert www.designer.duluxamazingspace.co.uk

Hello Nitin, Thank you, for some excellent suggestions. I would however like to clarify my requirements/dilemma a bit more. 1) The built/carpet area for this 3 BHK is about 1600 sqft (Superbuilt 1960 sqft). What is the appropriate tile size I need to scout for? More specifically, will Ultima-range-like huge tile sizes (i.e. 120x180cm2, 120x120cm2) be suitable for this area? 2) While I am thinking of white (based) tiles, I am not necessarily looking for super-white tones (it gives a bit of a commercial look, and will need extreme maintenance). Something more practical, and with some depth/dimension is what I am trying to identify. Any suggestions? 3) Would you advice that I consider other white-toned flooring options like Terrazzo (Bharat Floorings is having a Cast-in-Situ option, but I am yet to go to their showroom)? Thanks and Regards.

Hi Karuna, Here are a few pros and cons of using large tiles on walls - Pros - 1] They have lesser joints to fill and hence give the space a larger look and feel. 2] They look like stone cladding if installed properly. Cons - 1] They are costly as far as their rate/square foot and labour cost is concerned. 2] They require epoxy grout / adhesive instead of the regular cement grout which usually adds to the cost. 3] Since they are huge in size, they are not suitable for small areas due to the hassle of cutting the tiles manually to fir the size. 4] There is a high possibility of warp age in the tiles due to their size and because of this either their joints wont match or the surface may look undulated. Hence, it is recommended that large tiles be used for floors instead of walls. We would suggest to go in for the smaller sized tiles like 2'x2' or less for a more aesthetic look. Just apply tiles between the kitchen cabinets and avoid doing so near the peninsula. It would make the kitchen look lighter and brighter and not like a bathroom. Also for the back splash you may go for any of the following tile options - 1] Mosaic 2] Ceramic tiles/ Vitrified tiles 3] Natural stone such as granite All the best! Regards, RnD Atelier Nagpur