Starting with the bedroom suites...have your bedding selected. Choose a color that coordinates. You can accent the headboard walls with a darker color and carry that darker color into bathroom on the walls, or continue bedroom color and carry the accent color into your towels and shower curtain. I would paint kitchen and 2 dining room walls the same color, selecting a darker color for the drama in the dining room and contrast with your kitchen cupboards (such as your green color). The other walls in your living room, foyer and hallway, should be your neutral color such as a camel or warm gray. This neutral is bumping up against all of your other room colors. So, it will make a good transition from room to room. On the bold side, you could find a great wallpaper for the two walls in the dining room. Don't forget to play up your foyer with furniture for that first look impact. Selecting your bedding first, allows you to tweak your paint color and hue, and the darkness of your color. Enjoy.

1.When to Pull the Trigger The first step in calculating your ROI is to examine your existing lighting. It might be strange to hear this from a company that manufactures LED fixtures, but the technology is not the right fit for every facility and budget — at least not yet. Project managers should be wary of any company or salesperson that tries to claim otherwise. The next decade will likely bring new capabilities and cheaper technology. If you have a facility full of modern fluorescents that are well-placed, you may be wise to switch to LED fixtures in phases. Begin with the areas where LED light can have the biggest impact, like high-volume production lines, warehouse aisles, cold storage and cranes. These areas can suffer significant productivity losses when lighting goes out and stopping production during normal shifts is not an option. The best results from a full LED retrofit will be seen in facilities still using metal halides or other high-intensity discharge lamps, as LEDs have the potential to cut lighting-related energy expenses in half and decrease overall energy use by up to 50 percent. 2.The Site Visit: They Should Come To You Once you’ve decided on an LED retrofit, the first step is a site visit. There is no universal standard or equivalency formula that ensures quality coverage when switching out metal halides, flourescents and LED fixtures. Each type of fixture distributes light differently, so a 1-to-1 fixture swap rarely produces the ideal coverage. Because of that, any responsible lighting project design should begin with an in-person inspection. Light levels are impacted by a variety of factors including placement, obstructions, wall colors and the amount of dirt and dust present. The same plan won’t work for a cold storage facility in Houston that works for a manufacturing plant in Kansas, even in a building with the same square footage.If companies offer over-the-phone or over-the-Internet quotes based on the idea of equivalencies, they are offering rough estimates, not guarantees. On the other end of the spectrum, specialty firms also charge exorbitant fees for engineer-designed layouts. Good project management includes a no- or low-cost site visit in your scope of work and a specialized layout that is part of a larger project management cost. 3.A Good Quote: It’s a Workhorse, Not a Unicorn There are three key elements to project management: quality, service and price. Every manager wants the unicorn — a company that delivers high-end products for a low price with services like installation and rebates. But that’s not a sustainable business plan. If companies promise you the impossible, or even just a high-end fixture at a bargain price, they’re probably stretching the truth to make the sale. Be leery.Instead, a good quote offers expert advice, outlining how you should devote your project resources to maximize your ROI. If your budget is limited, or allocated over a five-year period, then a strong quote will include installation in phases. The quote is your blueprint, so it should focus on your goals and resources instead of offering canned options or simply replacing halides or fluorescents. A well-designed LED layout will account for changes in light distribution because LED output is more focused horizontally and vertically than light from older technologies. You’ll likely need grid adjustments involving electricians and other contractors. Aside from seeing your goals and having a clearly articulated implementation plan, a strong project proposal should also spell out who will take responsibility for everything from electricians to contractors to scheduling. If the contract is unclear or the sales reps sidestep the issue — walk away from the deal. It’s more valuable to pay for good service than to pay twice for bad service. 4.Installation Done Right: Avoid Costly Disruptions The most important question to ask a potential project management coordinator is “Can you guarantee installation that minimizes work interruptions?” Paying for project management is valuable, but only if the project management works. Demand a single point of contact, accessibility during installation and confirm a clear plan of responsibility for potential delays. Installation is one of the hidden costs of retrofit projects. On paper, coordinating your own retrofit installation reduces the project costs, sometimes significantly. In practice, your own lack of expertise can cause hiccups in the process that can cost valuable production time and staff time, and reduce the overall quality of your LED investment.It’s essential your project manager understands local, statewide and national energy codes. This is a key detail that may help you weed out the light bulb salesmen from the lighting experts. If no one is talking codes, then you’re more likely to be left with a liability than an upgrade. 5.Closeout Procedure: Don’t Walk Away Before You Measure Before you end the project, the company you hire should come in with reliable technology and measure the new light output in your space. If you don’t hit your foot candle goals or if the occupancy sensors aren’t working properly, your point of contact should make it right, at no additional cost. The final step in the close-out procedure – the rebate – should also be free of charge. Rebates can cover up to 50 percent of your total project costs when switching from an older or inefficient system. Push back if your project manager asks for rebate fees or guarantees a rebate as part of a price reduction plan. A rebate is an estimate and it’s critical to understand that rebates are not guaranteed. Local and state rebates can depend on the money available to the issuing agencies or factors outside the scope of your project. Utility providers qualify the availability of funds only at the start of projects and typically must visit your facility to validate the existing system compared to the LED system being installed. Relying on remaining available rebate dollars that may be exhausted prior to your approval and start date may leave you frustrated with your project. When you are ready to speak to someone about a lighting retrofit for your facility, contact our professionals at Worldwide Energy. After explaining the process of upgrading your lighting, you will see that our practices follow Mike’s guidelines laid out in the article. When you work with Worldwide Energy, you get an experienced and efficient team working hard to provide you with the best service available.

Hello Swati, You may first want to decide whether you want the TV to be floor/ ceiling/ wall mounted. The answer will vary based on that. You can buy the swivel online or your nearby TV stores. For example you can search for "Smart Shelter 360° Rotation" on Amazon or Flipkart. PS: No we don't get any commission for that :) Thanks, Nitin Cornerstone Designs, Bangalore.

The living room window itself does not appear to be designed to let much light through. Please show a photo of that window, also of what lies outside the window. In the meantime, I suggest that you replace the builder-installed window with one of your own choosing. Use toughened glass rather than this heavy grill. Minimise the frame, if possible, particularly if there will not be much air coming through. If there is the potential of air but not much view, then have a sliding or bifold window that maximises the opening. On the blank wall outside, if that's your view, put up a green wall, creeper, something to improve the outlook. For nighttime viewing, add mild uplights in a natural white shade, focused on the greenery. Or else, you may be able to put up a reflective surface on the facing wall, to bounce in more of whatever light there is. Such as a coloured glass mural if not a plain mirror. Once you have maximised your window, move on to the wall to the right of your living room photo. That is, the wall that your living room shares with the west bedroom. Use a very large mirror on that wall to expand your living room visually and to bounce more light around. To cut down on expense/effort you can make it out of several standard-size sheets rather than one giant sheet. However, if that wall is to be covered with storage, make sure the front surface of the cabinetry is fairly light-coloured and reflective. Last, if not yet satisfied, consult a lighting expert for this room. That would be useful. These are fairly expensive solutions, all in all, but they should help.