I have a plot of 40'x50' in Devanahalli, Bangalore and want to construct a 2 storeyed building with conference room in the ground floor, startup co-working space in the first floor, 2bhk in the 3rd floor... I have 9nos of steel 21' (heiight) x 15" (width) I channel of 10 guage, I want a experienced fabricator in composite steel concrete structures who could do the design, fabrication.... Please connect immediately..

living/dining/kitchen it's an open layout like in one of the images. the ceiling is uneven so we are planning to get it fixed with re-plastering. I might not be able to get a skilled painter in my budget to get the textures right, so I thought by just applying a coat of cement I wouldn't need a very skilled worker and also get the industrial look.

Hello, Exterior paint finishes are required to protect the walls from weathering. So in case if you leave the plaster without painting, you will be leaving those minor hairline cracks/pores in the plaster to absorb moisture and water during damp seasons. Hence it's advisable to not leave it at the plastering stage. However there is another way. You can put a wire mesh and cast a 2-3 inch thick layer of concrete (without coarse aggregates) over the brick wall. This might be equivalent to the cost of exposed concrete texture finish, and also make your wall thicker, but it will provide the authentic look you want without compromising on the safety of the structure in long term. I hope this was helpful. Regards Ar. Nilanshu Kadu (Proprietor, WEIRD)

Just leave it as it is apply a layer of matte varnish over the concrete ...if needed just add a plank of leather finished granite over the tread