One possibility would be to swap the living room and the dining room. Since the current living room is larger than the current dining room you could still keep some comfortable seating (couch and upholstered chairs?) against the front wall for a keeping room/dining concept. Then your new dining areas (kitchen and dining room) and living areas (living and drawing room) would have good flow between them, which would work well both for family and entertaining. You could also add some builtin bookshelves in the drawing room or new living room to create a library area to add another fun element to the living areas. These bookshelves could be against the long walls in the drawing room, around the window with a window seat in the living room (former dining room), or built to create some separation in the open area between the drawing room and living room/stair area. Your plan seems to show some sort of builtin there, but I'm not sure what it is.

dojani30 is right, a pocket door is your very best option. As it is now the door placement makes it necessary to enter the entire room before the door can be closed and that's awkward.

Pankaj, I just realized that initially you told us that the bathroom area was 12'-0" x 9'-0" and later you mentioned that it was 11'-8" x 8'-0". In the last floor plan, I forgot to change the bathroom with the new dimensions. Below is the floor plan with the correct dimensions for the bathroom. The bedroom is ok, I drew it 19'-2" x 12'-6". The new layout does not change the way things are placed. Everything still fit. The only difference is that the vanity is now 4'-4" long instead of 4'-8". and the toilet is closer to the shower by 1'-0". Can you give me the lengths of the walls K and L. They are the walls between the vanity and the shower area. I will send you the new layout once you give me the length of these 2 walls.

Most my doors were already here, but I did have one moved over, about 6 inches. However, the entire space was demo'd, and rebuilt, so that's not the best example to draw from. If you want the door hidden, in a pocket, yes, you will need a skilled carpenter. Essentially, the opening header and frame, will become twice it's size, with the "pocket" part, hidden behind the wall. The studs/supports will need to be removed to make a space for the door to slide into. Do you have any switches or outlets on the fireplace wall?