My first suggestion would be to change the layout of the room at bit. this is my suggestion:i also think that you should paint the room in a uniform light colour (preferable white) and also paint the wardrobe in the same colour so it doesn't overpower the entrance and blend in with the room. my second most important suggestion is to increase storage. here are some ideas for that: simple plank shelves with filing boxes and folders with labels can be a cheap and efficient way of storage of study material. here are some links for such folders and boxes: https://www.amazon.in/Elan-Bookshelf-Executive-Certificates-Certificate/dp/B00HWRHKOS/ref=pd_sbs_79_11?_encoding=UTF8&psc=1&refRID=BQE8PBQNYQYXHHDEBAVQ https://www.amazon.in/Corpac-Multipurpose-Durable-Plastic-Storage/dp/B01GBBHT1E/ref=pd_sbs_229_40?_encoding=UTF8&psc=1&refRID=1CC92M79MCJDPWBD53H9 https://www.amazon.in/Aristo-Basket-Medium-Without-Multi/dp/B06WGR811H/ref=pd_sim_229_4?_encoding=UTF8&psc=1&refRID=JD75V1WW64930CV4NG69 Also the sunlight is the biggest asset of the room and yet the aluminium window is an eyesore. so i would suggest some nuetral shade curtains. and you can play with the colors of the room with the bedsheets. And agree with studio chippan's suggestion of a painting or a family portrait or frame certificates of the kids achievements. Best of Luck, Purva Saksena (Architect)

Hi, I am from Assam, Guwahati. Yes it is warm humid place with lot of rains (like kerala). The bookcase is gradually drying. Fortunately last few days were very sunny and airy and my room has two big windows. Few mor details of my bookcase. It is 8 feet wide, 6 feet tall and 11 inch deep. It was attached with wall with 6 wall screw and has four pair of legs.I ask the carpenter to divide the bookcase into 3 part (32 inch each) and two door system for each part. Every part has 6 shelve from top to botom. There is no plywood or wood in back. I made it that way because the bookcase is attached in my room's inner wall I understand that the bookcase may have very little gap in between wall and wooden planks and i am ready for it. But I have no idea that beacuse of faulty mesurement, it became 1 inch gap between wall and sheve in the upper side. In lower side it is very minimum gap. I stop the carpenters to put the glass door. But now I see that they also make fault in making the doors. The doors are heavier that the shelf. The wooden planks are 1 inch thick while the door are 1.1/2 inch thick. I actually visit few hardwere shops here, but most have no ideas what to do and few says to apply wall putty to fill the gap. But my back wall is coloured (old wall, that why) and wall putty will not set on old wall and timber. I cannot remove it now from the wall otherwise the wall may destroyed. I really need a step by step guide now that what to do after the heves are dry, how to fil the gap and how to put the door without further damaging the shelf.

Hi Mayank, Do look at the Greenlam Clads series of exterior grade facade systems. You can find many options to chose from. For exterior cladding wall tiles, you can check out Johnson tiles Exterior wall tiles. Regards Shreela Shreela Sharan Architects architecture+interiors Mumbai

The hassle with square wood-look tiles is that they look too artificial. The only way to avoid that would have been to lay them with the grains alternately- vertical, horizontal- in a chessboard pattern. However, you do get tiles in 6" x 24" which you can lay in a break jointed pattern as shown here. They mimic the look of decking planks