I like the idea of putting the computer away in a closet ,actually I do a lot of sewing too so may be I will try to combine the space for my computer and sewing machine. Thanks for the suggestions ,I will google murphy bed and get the details. LEELEE iF YOU COULD POST SOME PICS OF THE BIFOLD DOORS IN THE CLOSET i WILL WORK ON THE PLAN

They are right, get a pro to help! Even if you jut pay them for a few hours, its worth it! With that said, instead of making the 10x13 bathroom accessible to guests, why not leave the other one as is, since it is common already and change the 10x13 into study space? Then there is not a bathroom opening up to the kitchen. Also it is larger and will allow for more space. Next owners might make it into a large walk-in pantry. Or if you can put laundry in your unit, you could add that to that room also. Desk could double as folding table. Master bedroom - put the bed on wall that backs to bathroom. Gives you great view of bed from doorway and allows natural walk way to balcony.

Debbie, acm - Thank you very much for responding. This is a new apartment and not a remodel. I have attached the floor plan of the room & closet. In the photo below the closet is the space "DRESS" and having dimensions 5 ft 11" (X axis) x 4 ft 7" (Y axis). For representational purposes, the diagram shows an L shaped closet. Ignore that - this is a complete blank space. I am instead planning on putting the closet along the 5 ft 11" wall- but on the opposite side instead of the side shown in the diagram. So imagine my closet along a single wall, set against the wall marked with a thick dark line. acm - I did not mean a bi-fold. But rather the traditional shutter door which some may refer as a swing shutter. My dilemma is - should i use sliding doors or regular doors ? I divided my closet into 4 major compartments, each 1 ft 6" wide. So there are a total of 4 doors. Depth of closet is 2 ft. Hence walkthru space is 2 ft 6". When a closet door is open, there wld be 1 ft space between the open door & the wall. Within each of these 4 compartments, I have designed multiple external drawers upto 2 ft height from base. So the shutters/doors planned only for the portion above 2 ft. Sliding Doors - Pros - Swing space not needed. Can place a slim dresser in the corner if I want to later. Cons - Expensive as it will needlessly cover the bottom-most drawers; Sliding doors coming off rails. Regular Doors Pros - Inexpensive. Can be used to cover only the part above the drawers (need not cover drawers). This way I can open the drawers below quickly & easily. Cons - Not sure if 2 ft 6" is enough clearance space to open 18" doors. Hope this makes sense. What do you suggest?

Dear Vinod, That's what happens when you give a project to a carpenter cause they view it as the single element and can't imagine where and how it is going on with the space around. "They literally don't care" except the money they save in that project. As the wardrobe is glossy and dark gray you have to make-over everything in that room to makle it look better. So better go for removing it which is more economical, and if your wardrobe is done with solid wood or timber just go for wood finish paints (veener/varnish/some other) or else go for duco paint or any other that can be applied on it. But BETTER consult a Designer or an Architect to those kind of works not carpenter or some vender. And lastly remove that funky looking overhead outcrop. Have a nice day