I like this tile as well. Very sleek and mod looking. I would consider running it vertically instead of the picture horizontal pattern. It might give the illusion of more height in the shower surround. The color is great. If you are worried about it being "too much," you could always see if they have the same tile in a different shade and mix the two or doing one wall in a contrasting (lighter) color. I personally like it as long as you have good lighting.

Fareham, Although from your description it appears to be grouting gone wrong thing but attached pics tell a different story. The size of floor tiles selected is not appropriate. It appears that someone may have walked over the tiles while the cement was still wet. If waterproofing was not done properly then these things may eventually snowball into a bigger problem. Looking at the pics , we would not recommend you to call the same contractor anywhere near your place again. It will be costly fix but it should be redone (at least the flooring tiles) to avoid further damages. Thanks, Nitin Cornerstone Designs, Bangalore.

That explains his opinion. Your description until now was for outlay doors. Slideline 16 is capable for 50-60 kg and 18-24 mm doors only. As I said earlier, not a big fan of bottom running sliding systems. Hope it works fine for you. Steel decorative strip is possible . But avoid deep cuts on the door that would increase the chances of bend/warp.

In that case , wall hung cabinet would be able to support the slab and sink. Is there a reason you want it it to be wall hung cabinet. You have made safe skirting space and even a floor mounted cabinet should be fine here. Regarding material, for the carcass you can opt for granite vertical slabs and BWP ply shutters for floor mounted one. But if you prefer a wall hung cabinet then a BWP ply carcass sould be good enough. The wall groove should be cut only on the longer side. Thanks, Nitin Cornerstone Designs, Bangalore