Hi! So I'm not much help with paint color, but wanted to share two things that we did which you might consider: first, we got a high-heat black spraypaint (Rustoleum from Home Depot) and painted the fireplace face plate (the brass part) black, which instantly updated our fireplaces for about $10; second, I did not care for our red brick fireplace, and hand-painted it to look like a different color of brick. Without priming, I hand painted each brick Benjamin Moore Eagle Rock, then sponged on a lighter grey (Willow Creek) and a darker grey (Ironhorse, I think). Later, I decided it needed some brown, so I sponged on a bit of watered down brown paint (can't remember the color). I took care not to get paint on the mortar. The whole project took about a day. It came out great and I get tons of complements. If you are at all hesitant about getting the "painted brick" look when you do it all in one color, I would consider tying this method first. 99% of people would not know that the brick had been painted. If you don't like the way it turns out, you can always go back to your original plan!

Thank you roj leather and Simon for your recommendations. I like the hanging chair and the almanda creeper on the wall. This will certainly liven up the patio.

Hi again- I'm an Aussie and the term 'wood burner' means a metal box with a glass door on the front and in the situation where you have a 'double sided wood burner' that means two glass doors on each end. A wood burning fireplace open either side between two rooms is a different thing. Sorry about the confusion. I looked into building one of those in brick and was strongly advised to place a glass panel on one side ( as Ironwood has pointed out) the natural draughts that move through your home will take the smoke with it. A piece of glass will prevent this from happening.

Hi jaymodh. These panels have different price points, most range between $20-$60 per square foot. Try contacting modulararts via info@modulararts.com | 206 788 4210. I am not sure if they would work with you though(because you are a homeowner, a lot of companies would only work with architects/designers). If that does not work, contact Linda at Studio Glass Works at (608) 836-6500 ( Unites States code is 1). We order those panels through her company. Ask for textured wall panel system. Let me know how it goes :)