I think this piece is quite lovely. It appears that your couch and chairs have dark wood so I would be tempted to stain or paint the buffet to match these items. Changing the large modern handles to smaller antique ones might help to make it less bulky looking and tie in with the other items in your room.. I like the idea of putting a mirror in the upper door, however much as I like the criss cross effect in the sample pictures, adding more detail may conflict with the curves in your sofa and chairs. You could look for a decorative detail that has more subtle style. As for placement, it might go on the short wall where you have a bench or even on the wall where you have your table with two chairs, one on each side to balance the look.

Hi Rahul Satija To answer your question, regarding which material to use for the outsides of your home Terracotta Brick - unless you have used bricks that are meant to be left exposed, ordinary bricks will take in a lot of water and leave the walls damp, and hence not a great idea. You could ofcourse cover it with a veneer of brick cladding but that is something we would not propose. Between wooden cladding and paint, it frankly depends completely on your budget. Wooden cladding looks extremely good but is quite pricey. Our suggestion would be to paint the majority of the home, with highlights in parts in wooden cladding.

Hi, I am from Assam, Guwahati. Yes it is warm humid place with lot of rains (like kerala). The bookcase is gradually drying. Fortunately last few days were very sunny and airy and my room has two big windows. Few mor details of my bookcase. It is 8 feet wide, 6 feet tall and 11 inch deep. It was attached with wall with 6 wall screw and has four pair of legs.I ask the carpenter to divide the bookcase into 3 part (32 inch each) and two door system for each part. Every part has 6 shelve from top to botom. There is no plywood or wood in back. I made it that way because the bookcase is attached in my room's inner wall I understand that the bookcase may have very little gap in between wall and wooden planks and i am ready for it. But I have no idea that beacuse of faulty mesurement, it became 1 inch gap between wall and sheve in the upper side. In lower side it is very minimum gap. I stop the carpenters to put the glass door. But now I see that they also make fault in making the doors. The doors are heavier that the shelf. The wooden planks are 1 inch thick while the door are 1.1/2 inch thick. I actually visit few hardwere shops here, but most have no ideas what to do and few says to apply wall putty to fill the gap. But my back wall is coloured (old wall, that why) and wall putty will not set on old wall and timber. I cannot remove it now from the wall otherwise the wall may destroyed. I really need a step by step guide now that what to do after the heves are dry, how to fil the gap and how to put the door without further damaging the shelf.

Anita Vitrified tiles by themselves do not particularly allow the walls to breathe, and hence are prone to cracking. That being said they do not collect moss either. If you are however set on using these tiles, I suggest you use them in a mosaic fashion, where smaller tiles or broken pieces are used. This will allow the wall to breathe, though the moss collection might be more due to the greater amount of grating.