As hatetoshop mentioned , moving the bed to the gap between two window is would be right choice. as in current placement you have windows above your head which does not help for a view and looks odd. you could place double curtain rod or use existing curtain rods and add additional sheer /thin curtains for additional privacy during day as well as light. In future you can add two bedside tables as well and some bedside lamps. In India we are still not used to lower lighting (floor lamps, table lamps with warm day light bulbs) but trust me,it will add new dimension to your bedroom. Also some wall art. example a well framed big size ( 2ft * 3ft) art poster above bed (cheap way to add life (I wont use word "Class" (find it too much)) . Also in future you can think about having a pair of bed sheet (to sleep on ) and bed cover/spread (a good quality cotton one) to cover the mattress during day. And a dhurrie runner would be a good addition as well. All above wont cost too much and maybe little bit investment in quality material can be good as well as u don't have to change these often and can be a long term solution.

Go for Asian Paint Re-painting Process Repainting is done when your home is already painted once. It is required when you need to decorate the house afresh or old painted walls are not in good condition. Step I – Prepare Wall for Painting 1. Scrap the old paint using sand paper to remove falkes, loose particles. 2. Fill the cracks, pores, damages using putty – wherever required. Please note – putty is not required in re-painting in general, however one of coat of it can be used if walls are damaged badly. Step II - Apply Primer 1. Apply one coat of primer to smoothen the surface. 2. Let is dry for few hours. Step III – Apply Paint/ Designer Walls. 1. Apply two coat of paint successively after drying the first coat. 2. Or Get your texture/stencil/design work done Please Note- Primer is a must for Designer Walls. Fresh Painting What is Fresh Painting and when it is required? In general we do Fresh Painting in newly constructed home, apartments. In Fresh painting walls are completely rough. Some times in old houses fresh painting is also needed when its wall condition is really bad, damaged or outer layer of old paint is completely broken. Step I – Apply Primer and Putty. Primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted. So primer is always used in fresh painting. Putty is generally used for filling the minor cracks, wholes, damages to level the surface for painting. Putty is a generic term for a material with high plasticity, similar in texture to clay or dough, typically used in domestic construction and repair as a sealant or filler. 1. Apply One Coat of Primer, let it dry for approx 2 hours. 2. Apply One Coat of Putty on Newly Constructed Wall as base. 3. Let it dry for some time let say approx. 3-4 hours. 4. Apply Second Coat of Putty and Let it dry again for few hours. 5. Use Sand Paper for smoothening or levelling of wall surface. 6. Apply Second Coat of Primer after drying the putty. Step II - Apply Paint 1. Get the requested products which need to be used, verify the color code, pour the paint in bucket and mix some amount of water. 2. Apply first coat of paint using roller and brush. 3. Let it dry for some hours and apply the second coat of Paint. 4. Final touchup if finishing is needed. Take care of all above process

As the windows have white frames, you can opt for a beige colour for the walls. It will match the blue roof as well.

Karthik, Interesting. Not sure who would have advised you to get these tiles. Usually, these are meant for bathrooms and swimming pools. Let us get back to you on suggestions to work around this one. Thanks, Nitin CORNERSTONE DESIGNS Bangalore.