On your paint problem I can't be much help. This usually happens because of damp -- please get a damp expert to make sure that there isn't any damp lurking in your walls. I had this once when I had pipes leaking inside the walls. I didn't know that. The other alternative is something like painting before the plaster is dry or some kind of chemical mismatch. I do know you will have to scrape all the mucky powdery stuff away and start again, at least on those areas. Don't try to seal and prime and repaint until you know exactly what the problem is and how to fix it.

Need quotes fro below listed work in 2000 sq ft independent floor. ROOF P/F Pop false ceiling excluding paint Gypsum Board Ceiling PoP Cove Plastic Paint Ceiling P/f Veneer false ceiling w/ polish - Oriental Bamboo: Decowood P/f Wooden slat ceiling w/ polish P/f MDF perforated slats w/ high gloss paint WALLS P/A Wall punning Breaking and Removing Wall Tiles & Plaster Laying of tile on wall with cement mortar 300x300 or bigger Laying of tile skirting with cement mortar (rft) Luster Paint on Wall P/A Plastic emulsion paint on wall Acrylic Exterior Wall Paint FLOOR Floor breaking Laying of tile on floor with cement mortar 300x300 or bigger Wooden Flooring + Skirting (incl. laminated flooring) Laying Marble flooring P/F 3'' PCC on floor KITCHEN Full Modular Kitchen (sq. ft) Semi-Modular Kitchen (without platform & structure) MISC. Fixing Door Frames Per Door P/F 1"X4" MS pipes with Duco paint NOTE: P/F = PROVIDING & FIXING, P/A = PROVIDING & APPLYING

i own a 3 bhk flat it's under complete renovation so I wanted to know more about how to light up the house and create an ambience. I have used high gloss ivory shade tiles brand:kajaria. walls will be painted neuteral colors it would be beige or white(not yet decided).could you please tell me if warm light is good for residence and if yes then how much kelvins to be used on the light. I was looking for 4000k. is cob lights are good or panel lights,I personally like cob lights. your suggestion please.

Hello Saj shk, Always avoid using high gloss as oil stains are more prominently seen in such surface. Your grey laminate is too dull and shabby to be used in an area where you need more lively effect. Try to go for different combination. Now a days acrylic sheets are available with great finish and good colours and it is 90degree bendable so joints are smooth and finished. Design the o.h. cabinets in such a way that you utilise total height of the kitchen and Use profiles for the same.