Hi Sathish Thank you for writing to us. houzz doesn't directly offer the services you're looking for. I suggest you click on the find professionals tab on houzz, choose the relevant professional category, filter the results by your city and reach out to a professional from the listing.

1.When to Pull the Trigger The first step in calculating your ROI is to examine your existing lighting. It might be strange to hear this from a company that manufactures LED fixtures, but the technology is not the right fit for every facility and budget — at least not yet. Project managers should be wary of any company or salesperson that tries to claim otherwise. The next decade will likely bring new capabilities and cheaper technology. If you have a facility full of modern fluorescents that are well-placed, you may be wise to switch to LED fixtures in phases. Begin with the areas where LED light can have the biggest impact, like high-volume production lines, warehouse aisles, cold storage and cranes. These areas can suffer significant productivity losses when lighting goes out and stopping production during normal shifts is not an option. The best results from a full LED retrofit will be seen in facilities still using metal halides or other high-intensity discharge lamps, as LEDs have the potential to cut lighting-related energy expenses in half and decrease overall energy use by up to 50 percent. 2.The Site Visit: They Should Come To You Once you’ve decided on an LED retrofit, the first step is a site visit. There is no universal standard or equivalency formula that ensures quality coverage when switching out metal halides, flourescents and LED fixtures. Each type of fixture distributes light differently, so a 1-to-1 fixture swap rarely produces the ideal coverage. Because of that, any responsible lighting project design should begin with an in-person inspection. Light levels are impacted by a variety of factors including placement, obstructions, wall colors and the amount of dirt and dust present. The same plan won’t work for a cold storage facility in Houston that works for a manufacturing plant in Kansas, even in a building with the same square footage.If companies offer over-the-phone or over-the-Internet quotes based on the idea of equivalencies, they are offering rough estimates, not guarantees. On the other end of the spectrum, specialty firms also charge exorbitant fees for engineer-designed layouts. Good project management includes a no- or low-cost site visit in your scope of work and a specialized layout that is part of a larger project management cost. 3.A Good Quote: It’s a Workhorse, Not a Unicorn There are three key elements to project management: quality, service and price. Every manager wants the unicorn — a company that delivers high-end products for a low price with services like installation and rebates. But that’s not a sustainable business plan. If companies promise you the impossible, or even just a high-end fixture at a bargain price, they’re probably stretching the truth to make the sale. Be leery.Instead, a good quote offers expert advice, outlining how you should devote your project resources to maximize your ROI. If your budget is limited, or allocated over a five-year period, then a strong quote will include installation in phases. The quote is your blueprint, so it should focus on your goals and resources instead of offering canned options or simply replacing halides or fluorescents. A well-designed LED layout will account for changes in light distribution because LED output is more focused horizontally and vertically than light from older technologies. You’ll likely need grid adjustments involving electricians and other contractors. Aside from seeing your goals and having a clearly articulated implementation plan, a strong project proposal should also spell out who will take responsibility for everything from electricians to contractors to scheduling. If the contract is unclear or the sales reps sidestep the issue — walk away from the deal. It’s more valuable to pay for good service than to pay twice for bad service. 4.Installation Done Right: Avoid Costly Disruptions The most important question to ask a potential project management coordinator is “Can you guarantee installation that minimizes work interruptions?” Paying for project management is valuable, but only if the project management works. Demand a single point of contact, accessibility during installation and confirm a clear plan of responsibility for potential delays. Installation is one of the hidden costs of retrofit projects. On paper, coordinating your own retrofit installation reduces the project costs, sometimes significantly. In practice, your own lack of expertise can cause hiccups in the process that can cost valuable production time and staff time, and reduce the overall quality of your LED investment.It’s essential your project manager understands local, statewide and national energy codes. This is a key detail that may help you weed out the light bulb salesmen from the lighting experts. If no one is talking codes, then you’re more likely to be left with a liability than an upgrade. 5.Closeout Procedure: Don’t Walk Away Before You Measure Before you end the project, the company you hire should come in with reliable technology and measure the new light output in your space. If you don’t hit your foot candle goals or if the occupancy sensors aren’t working properly, your point of contact should make it right, at no additional cost. The final step in the close-out procedure – the rebate – should also be free of charge. Rebates can cover up to 50 percent of your total project costs when switching from an older or inefficient system. Push back if your project manager asks for rebate fees or guarantees a rebate as part of a price reduction plan. A rebate is an estimate and it’s critical to understand that rebates are not guaranteed. Local and state rebates can depend on the money available to the issuing agencies or factors outside the scope of your project. Utility providers qualify the availability of funds only at the start of projects and typically must visit your facility to validate the existing system compared to the LED system being installed. Relying on remaining available rebate dollars that may be exhausted prior to your approval and start date may leave you frustrated with your project. When you are ready to speak to someone about a lighting retrofit for your facility, contact our professionals at Worldwide Energy. After explaining the process of upgrading your lighting, you will see that our practices follow Mike’s guidelines laid out in the article. When you work with Worldwide Energy, you get an experienced and efficient team working hard to provide you with the best service available.

Don’t use too many colours. From the colours you’ve provided,BM Chelsea Gray and Martha Stewart Glass of Milk should go together and look good on the contemporary design of the bungalow.Something like the following pic :- Pic courtesy (Pinterest)

Choosing wall paints for your house can be a very challenging decision. There are many things which you may not generally know before buying wall paints. To help you make an educated decision while purchasing wall paints, here are the most FAQs about paint. What does curing period mean? Why should one follow this process? Curing period is the time taken for the paint to dry. It is done so that the paint does not react with the chemical present in the cement. How long does a painting project take and how long does it last for? The duration of the painting depends on the number of rooms you plan to paint, and how many painters are working. The Interior walls take approximately 10 to 15 days, and the Exteriors usually take approximately 15 days. Good paints applied with the correct number of coats generally last for 5 to 6 years. Can the products be applied during the rainy season? It’s quite risky to paint during the rainy season. If in case, you go ahead with the painting and it rains heavily, not allowing enough time for the paint to dry, you might have to face problems. Hence, we recommend you to observe the weather condition and then go ahead with painting. How quickly does the paint dry? Duration of painting depends on the number of rooms you plan to paint and how many painters are working. Paint drying time for Emulsion is 4 hours minimum, though 6 to 8 hours is preferred. Distemper takes 6 to 8 hours, while Enamel, Primer, Lustre and Matt Finish require 8 to 10 hours. Touchwood takes 6 to 8 hours. How many coats of paint should be applied? Depending on the condition of the walls and the colour of previous paint, 2 to 3 coats should be applied. What is the expiry date of the paints? The general expiry date of the paint is 3 years from the date of manufacture of the Paint. If you have opened the lid of the product, we recommend you use the product within the next 24 hours. What are the do’s and don’ts to remember while painting? Do’s: 1) Save on costs; buy paint in the largest pack possible. 2) Stir and strain the paint thoroughly before application. 3) Rectify existing surface problems like cracks/seepage, etc. before the actual painting process. 4) Check the surface for dampness or water seepage. 5) Always clean spilled/splashed paint with a recommended thinner while it is still wet. Don’ts: 1) Do not use cotton rags for cleaning, use soft synthetic or muslin cloth 2) Do not apply the next coat without the first one drying 3) Do not sandpaper very hard, otherwise, there will be scratches, roughness, and poor gloss. 4) Do not apply very thick coats, otherwise, there will be a thick rough finish, resulting in slow drying. 5) Avoid mixing paints yourself. Buy readymade paints as far as possible, otherwise, there will be patchy and inconsistent columns in the finish.