I am so happy to see you here! I will have to go back and see if i can retrieve my posts... thought I would make them into a little book for my daughter, with photos. Quick run-down on the bathroom (not travels, no time) - The kitchen has a rather elegant sliding door with beveled glass panels. Painted white, since this was the original colour. GD's new bathroom has the doors I had picked earlier; i thought of polishing them but decided sprayed automobile paint (on a resin primer) would wear better. Especially since it is such a small bathroom, and she is so splashy. I have this finish in my kitchen and it has lasted 15 years now. A tad chipped here and there, but only needs a wipe down once a week. Same finish for the balcony doors, also split like the bathroom. We have a new wardrobe, a study table with built-in shelves, and a small chest of drawers for her odds and ends. I want to re-tile the tiny balcony, more as a little statement. Currently we are looking at Portuguese tiles, though I did think a mosaic with a funky cat might be nice. Let me see the costing. The room will be painted a neutral adobe, with bright white woodwork and an off-white ceiling. This means she can go wild with cushions and covers. Other changes in the flat; We have changed the glass in the master bedroom and living room from small cramped panes to a single pane for each section with a 1" bevel all round. Doubles the cost of the glass, but looks so elegant! The air-conditioning is being re-located. The compressors were all mounted in the bedroom and living room balconies, which looked terrible and meant the balconies (very narrow, only 30" deep) couldn't be used for anything. Not even plants. So they are being moved so that the compressors can be mounted at the rear of the building. two down, one to go. Now we can put in some nice plants, fishtail palms etc. The kitchen counter on one side came out intact and will be reused elsewhere. I am planning overhead storage, cupboards, and a draining cupboard for plates and glasses. Right now there is no dish washer, though a place is earmarked, but for now I will put in a cupboard with steel racks for cups, glasses and plates, all hidden behind pressed glass doors. This is all in the planning stage.... Pictures in a little while, they are mostly on my ipad and don't transfer well to the mac. They come without numbers... so I have to rename the or something. Somebody tell me how to do this!

The amazing thing is that you have the luxury of approaching the architect about these issues. Laminated glass should address the security along with any alarm or security system you plan on installing, though the laminated glass may have size limitations. Regarding the waterproofing you should contact the architect, contactor and waterproofing subcontractor, or see about hiring an independent waterproofing specialist who can detail and warranty the condition. As a design consideration, make the lower area a garden or gallery or sculpture area and upper should be all glass. Maybe a garden roof there too if accessible or visible. In any case looks like an amazing place!!

A few suggestions based upon your lower photo, the fourth I guess. a. If you had the wall built, ask the guys that built it to perform your wishes. If it came with the house, call the former owner, whose name is on your deed. b. If the former suggestion is a dead end, let's analyze before we plan. You want to have a space for cooking and dining outdoors. This is such a beautiful yard, it does not deserve a portable BBQ unit exposed when not on fire, so put it in the garage as soon as it is cool. If you are going full hog for a builtin BBQ facility, perhaps it can be built against an existing wall, and just the dining area then needs the increased space. A 6' wide round table, requires about 12-14' for itself and the surrounding chairs and service area. Will you be happy with only a 15' or even a 20' section of wall moved? c. Remove the plants from the area that you plan to usurp, and about 5' beyond, and rent a sod cutter to remove all of the lawn from the vehicle entry point to the lower curved wall, by the palm, and stockpile it in shade, if possible. d. Have the contractor saw a vertical cut in the wall at the points of removal. Measure the distance of the plant bed to back wall. Cut the front bed wall that is to be removed with two sections of that overall bed dimention, so they can be placed as end walls for the two sections of bed that are no longer continuous. e. Have the contractor dig up the wall, and cut the two pieces to remain so they are free of the wall to be dumped. He will remove the existing soil from the bed. Modify any irrigation that exists, and then install the two wall slabs to their new duty locations, attach them to the remaining walls, backfill and replant as required.. f. The next step is to cultivate the compaced earth in the lawn area, rake it and resod. If the dining/BBQ areas are to be a dining terrace, you might wait until the sod is reestablished, say another month, before initiating that construction, as you don't want the sod to remain in a pile for long, or you will have to buy new. If it is to be a flagstone terrace, you can have that material delivered and stockpiled where the bed used to be, while the wall crew is just leaving. Will that fill your need. Give this post to the contractor so he can take measurements, and provide you an estimate overnight. Summer cookouts have already begun. Looks like we will miss the 4th of July bash.

Dear Vinod, That's what happens when you give a project to a carpenter cause they view it as the single element and can't imagine where and how it is going on with the space around. "They literally don't care" except the money they save in that project. As the wardrobe is glossy and dark gray you have to make-over everything in that room to makle it look better. So better go for removing it which is more economical, and if your wardrobe is done with solid wood or timber just go for wood finish paints (veener/varnish/some other) or else go for duco paint or any other that can be applied on it. But BETTER consult a Designer or an Architect to those kind of works not carpenter or some vender. And lastly remove that funky looking overhead outcrop. Have a nice day