Interesting seeing designs from another country. Assuming the PUJA is located in the right location and the entrance to your home is the set of double doors adjacent to the car, I have the following comments/suggestions: 1. Regarding the bathroom on the bottom of the picture: a. It appears you have a walkway taking you from the large double doors(gate?) to the bathroom window. Is this correct and is this what you want? b. The room is sufficiently wide to add a bathtub or a shower. Switch the locations of the sink and the toilet, have the toilet turned to face into the room. This would provide easier use. You might also want to consider using a pocket door, will make the room feel more spacious. 2. Regarding the bedroom on the bootom of the picture: In the US we have built in closets but I kow other cultures use stand alone wardrobes. Not knowing what is custom in your country or what your preferences are, I would suggest moving the door over a couple feet and providing a building in closet the full length of the wall. This would allow you to completely customize the room's storage capacility - will it be filled with shoes and clothing or will is have boxes of files, luggage, etc. 3. The drawing room: a. If outsiders are not to use your family space, the orientation of the room will force people to see/walkthru your family lounge. b. If possible, can you shift or resize the drawing room such that it align better with the family lounge? If it can be shifted downward a few feet, you could angle the entry into the kitchen and the view from the family lounge would look better. c. As an alternative, could you reverse the stairs such that the main family lounge area shifts upward? recognize you will likely need to move the bedroom doors and possible reverse the bedroom and bathroom on the lower part of the picture to make sure the doors would work. 4. Kitchen: By US standards this is an average to smaller kitchen. we certainly have smaller ones in condos, apartments, and small homes. That said, I do believe in maximizing capacity and capability. The kitchen traditionally gets a lot of use by the family and has to be able to meet a multitude of needs. I am assuming the plan for the frig is to be located immediately next to the sink - where the empty space is. here are some thoughts: a. Do you need a door for the kitchen? If not, remove, if yes then make it a pocket door. b. Center the window to the OPEN area over the cabinets and align the sink in the center of the window. this will help with symetry. When in the kitchen, typically people spend a lot of time there - prepping, washing, drying, etc. It would give a nicer view than a blank wall or upper cabinets. c. Center the stove - this again helps with symmetry whioch in turn helps with aesthetics. d. Do you have sufficient storage in the house - think of everything that you have and the food products, kitchen items you will need to store. Again, culture differences mandate different needs. In the US we tend to do a bit of bulk shopping and generally have more "stuff" than we need so it is hard to determine what the right level is for you. Make a list of ALL the items you have for the place and assign a space to them on the plan. This is the best time (and least costly) to make changes to construction. 5. Regarding the bedroom on the upper wall - is there a reason the windows are different sizes, why not stick to the same size? 6. Storage room: Is there a way to relocate the "Low Height" restriction at teh entrance? Not sure is this simply means you aren't going to loose a couple inches or if this means a few feet. Big diffeence on how usable that space is. I hope some of these comment are useful. Best of luck with your project!

You can also think on panel work with some openable shutters which can hide the boards as well give an access to use when needed . Bottom can be a sleek storage with louvers where inverter can get tucked in and also a seat or a ledge used for multipurpose. One thing to remember this set out would not be budgeted but, can allow you to explore option to make it look good or articulate well.

Hello Ms Vijaya Yes, I was referring to the old post wherein you gave the details of your requirement. But it is somehow missing in the feed now. Installing a chimney (T shaped one) shouldn't be an issue even if you have a window. You could ask the carpenter to take a vertical support plank (of 18 mm ply) from the wall just above the window. Just to not let that support plank hanging, the bottom of the plank should be fixed to the grill of the window. In this way, you do not have to compromise on the ventilation from that particular window. Make sure dimensions of the plank are aligned with the hood of the chimney and also the height at which it has to be fixed. Something like below. Backsplash gives a splendid look to the kitchen as well as it is easy to maintain. You can also have digital prints to suit your taste, instead of a plain one. The negative sides of a glass backsplash are that it is relatively expensive and prone to shattering. Few things to bear in mind are before going ahead with glass backsplash - the electrical points and any other fixtures on the dado wall should be decided along with the dimensions as provisions have to be made for that in the glass before toughening it. Stick the glass to a ply panel and do not fix it using studs. Now coming to the overall design keeping in mind the aesthetic appeal, below are my assumptions: 1. West facing flat. 2. Your sink tap is on the East wall, near to the toilet. 3. Provision of pooja unit is not required in the kitchen. 4. Crockery to be placed in a separate unit near dining. 5. Kitchen should have maximum storage capacity. A look of a kitchen is decided by parameters like color combination, lighting, quality and type of the shutter material. In the below edited pic, I have given the possible spots for fridge, sink, breakfast unit, platform. You can have two L shaped plaforms (in red) along all the four walls. The placement of sink is indicated by orange boxes and you can opt for either of the position. It is not suitable on the East platform as it will be very close to the cooking range. Never have the sink at the extreme end of a platform, it will impede your movement near the sink and the space underneath is partially lost. The fridge's position can be either on the West side or South side. If you opt for placement on the West side, place a partition unit made of ACP/MDF fret work to hide the back of the fridge (line in yellow) and also to enhance the look of it when viewed from living area. Breakfast unit is indicated by brown box and take care that the dimensions will not hinder your free walking way to the kitchen. Place pendant lights over the breakfast counter. The space/wall to the left of the breakfast unit can be either used for storage or for placing some decor items/artefacts. Tall unit on the North-West platform has two options - in either of the platform corners. I would suggest to have it on the North side corner (beside the utility door). This tall unit can either house your microwave, oven etc. or just use the entire unit by placing shelves. Please refer to the below link for my suggestions on the color combination https://www.houzz.in/discussions/we-want-our-kitchen-to-be-renovated-dsvw-vd~5386939 Go for high gloss laminates/acrylic/PU finish for the skin of the shutters as per your budget. To further enhance the look: - Use under cabinet lighting, profile doors with spot lights inside, some contrast color open boxes in the cabinets (above the platform) to break the monotony. - Go for simple plain false ceiling and place track lights wherever you want to highlight. - Go for ample LEDs with daylight temperature. - Plan to have a handle less cabinetry (both over and under platform). You have the provision to use corner units, tall unit, rolling shutters, wicker baskets and even an island if you really want it (though I would not recommend). If you need help in designing your kitchen and putting it all together in a 3-D view, contact an interior designer. Srikanth Meticular Interiors

Thanks Rupal for valuable suggestions. I'm still not sure about the final layout and want to explore more on this. Do we have someone who has designed something similar. I understand that things will be more clear when we come out of drawing board and start implementing ideas. Hope to get more ideas from experts here.