I have a sitting area cum dining area of 300 sq ft which is adjacent to my kitchen ( 120 sq ft ). Over all colour theme is white and in STRAIGHT LINE. All cabinets in the kitchen are of white colour with grey Italian tiles and Siemens equipments. Have bought off white (leather) seven seater sofa with a coffee table with a frosted green glass top. The area left for the dining is approx 90 sq ft. My questions are : 1. Should i go in for a square dining table with six chairs or eight chairs. What should be the area of the top. 2. Should I go in for a rectangular table with six chairs or eight chairs. What should be the area and size of the table top. Have selected one with an area of 21 sq ft with a frosted green glass top. The fabric on the chair uses is black. 3.should I go in for a round table. What should be the dia or radius. Have selected one six chair Armani casa table with a radius of 2.5 sq ft. It is black in colour. The glass top is also black and the fabric on chair is also black. 4. What will be the best colour combination keeping in view the kitchen, sofa etc in mind. Pl advise....

Your right. I think it might look better without the couch. We just purchased the gray couch and moved the brown couch there until we sell it. Now that the brown couch is there my husband likes it. He likes to read his newspaper in the morning on it. I was thinking of putting a side table in place of the couch of getting a cover for it.

Can you post some pictures of your room. As to your question, if your ceiling is high enough that everything is out of the way of peoples' heads, I don't see why not.

the board is installed the wrong way to start with. it should be horizontal to achieve the rustic look. why do you need a painter for such a small job? try to remove the existing finish with mineral spirits or a heat gun. apply a coat of white acrylic primer and sand with 300 grit paper once dry. clean with vacuum. apply a coat of dark grey emulsion. dry. then spray a coat of white automotive laquer very lightly. usually thus dries quick in 30 minutes. very carefully sand with 400 grit on the grains and you will now have the desired finish. cost of materials approx 1000rs.