Whole House Audio
A C
10 years ago
Featured Answer
Sort by:Oldest
Comments (65)
User
10 years agoA C
10 years agoRelated Discussions
Wooden temples for residential houses
Comments (1)What? I think I'm missing something. Are you trying to sell something? If so post pictures of your products under the product section of this site....See MoreNeed help for my first home 400 or 430 sq ft .New home small 400 sq .ft
Comments (19)How do I make a small space look bigger ?? mirrors to add is one option ? can you suggest more options pls How can we make a small space look bigger ? 1. same colour pastel colors 2. some addition of reflection or mirrors 3.Having small frames on wall or minium on wall. 4.Having oine wall painted / with wallpaper draker than others what are other option pls suggest for my place ?...See MoreHelp for my small dream home .
Comments (32)Thank you nagadeepti, but there is an issue, my father has already finished with the basic foundation,sump, and pillars when I tried to tell him about the option he said that its not possible to change the plan , Please let me know if there are any other option , i have included the ground floor plan as well ,I thought of swapping the bedroom to kitchen in first floor , let me know if its possible according to vastu since its north facing site with roads on both north and south . we have made slight changes instead of full utility in ground floor its only till kitchen , bedroom is extended to make 9*10, and kink for fridge is removed . balcony in second floor is removed . Kindly help if there are any other suggetion to make look house spacious. stairs to the terrace from outside has to be there. I know iam asking for more in a small space.but please help. finally this is the elavation we have decided on with a little bit of modification like extended balconies. Thank you all but my effort is just to make everything good for a little house for my 1.3 yr old daughter. Anam...See Morecolour selection for painting of the house
Comments (5)Go for Asian Paint Re-painting Process Repainting is done when your home is already painted once. It is required when you need to decorate the house afresh or old painted walls are not in good condition. Step I – Prepare Wall for Painting 1. Scrap the old paint using sand paper to remove falkes, loose particles. 2. Fill the cracks, pores, damages using putty – wherever required. Please note – putty is not required in re-painting in general, however one of coat of it can be used if walls are damaged badly. Step II - Apply Primer 1. Apply one coat of primer to smoothen the surface. 2. Let is dry for few hours. Step III – Apply Paint/ Designer Walls. 1. Apply two coat of paint successively after drying the first coat. 2. Or Get your texture/stencil/design work done Please Note- Primer is a must for Designer Walls. Fresh Painting What is Fresh Painting and when it is required? In general we do Fresh Painting in newly constructed home, apartments. In Fresh painting walls are completely rough. Some times in old houses fresh painting is also needed when its wall condition is really bad, damaged or outer layer of old paint is completely broken. Step I – Apply Primer and Putty. Primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted. So primer is always used in fresh painting. Putty is generally used for filling the minor cracks, wholes, damages to level the surface for painting. Putty is a generic term for a material with high plasticity, similar in texture to clay or dough, typically used in domestic construction and repair as a sealant or filler. 1. Apply One Coat of Primer, let it dry for approx 2 hours. 2. Apply One Coat of Putty on Newly Constructed Wall as base. 3. Let it dry for some time let say approx. 3-4 hours. 4. Apply Second Coat of Putty and Let it dry again for few hours. 5. Use Sand Paper for smoothening or levelling of wall surface. 6. Apply Second Coat of Primer after drying the putty. Step II - Apply Paint 1. Get the requested products which need to be used, verify the color code, pour the paint in bucket and mix some amount of water. 2. Apply first coat of paint using roller and brush. 3. Let it dry for some hours and apply the second coat of Paint. 4. Final touchup if finishing is needed. Take care of all above process...See MoreEd
10 years agoA C
10 years agoUser
10 years agoA C
10 years agoUser
10 years agolast modified: 10 years agoA C
10 years agoUser
10 years agoOpus Audio | Video | Control Inc.
10 years agoA C
10 years agoA C
10 years agoOpus Audio | Video | Control Inc.
10 years agoA C
10 years agoUser
10 years agolast modified: 10 years agoA C
10 years agoOpus Audio | Video | Control Inc.
10 years agoA C
10 years agoOpus Audio | Video | Control Inc.
10 years agoKatrina
10 years agoA C
10 years agoUser
10 years agoA C
10 years agoUser
10 years agofromorma
10 years agoA C
10 years agoUser
10 years agoMark Ciraulo
10 years agoA C
10 years agoMark Ciraulo
10 years agoA C
10 years agoOpus Audio | Video | Control Inc.
10 years agoMark Ciraulo
10 years agoALL DIGITAL, LLC
10 years agoA C
10 years agoALL DIGITAL, LLC
10 years agodclostboy
10 years agoChateau Begnaud
10 years agoMark
10 years agoA C
10 years agoALL DIGITAL, LLC
10 years agolast modified: 10 years agoNorwood Architects
10 years agoVincent Longo Custom Builders
10 years agoDigital Logic Systems
9 years agoMark Ciraulo
9 years agoelisalinscott
8 years agommmmguinness33
7 years agoHome Theater San Diego
7 years agogladatbeach
5 years agoOpus Audio | Video | Control Inc.
5 years ago
User